S5500V2-48P-SI（两台设备堆叠之后，其中一台设备不定时重启）

两台S5500V2-48P-SI做堆叠之后，其中一台设备没有规律的不定时重启。是什么问题？ 

设备版本：

Version 7.1.070, Release 3208P03 

报错信息：

%Jun 30 01:22:00:597 2020 H3C OPTMOD/4/PHONY_MODULE: -Slot=2; Ten-GigabitEthernet2/0/51: This transceiver is NOT sold by H3C. H3C therefore shall NOT guarantee the normal function of the device or assume the maintenance responsibility thereof!

%Jun 30 22:00:38:462 2020 H3C STM/3/STM_LINK_DOWN: IRF port 1 went down. 

%Jun 30 22:00:38:545 2020 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE2/0/1 of aggregation group BAGG1 changed to the inactive state, because the physical state of the port is down. 

%Jun 30 22:00:38:545 2020 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE2/0/1 of aggregation group BAGG1 changed to the inactive state, because the physical state of the port is down.

%Jun 30 22:00:38:576 2020 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet1/0/52 changed to down. 

%Jun 30 22:00:38:586 2020 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE2/0/2 of aggregation group BAGG2 changed to the inactive state, because the physical state of the port is down. 

%Jun 30 22:00:38:633 2020 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE2/0/3 of aggregation group BAGG3 changed to the inactive state, because the physical state of the port is down. 

%Jun 30 22:00:38:647 2020 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/52 changed to down. %Jun 30 22:00:38:651 2020 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE2/0/4 of aggregation group BAGG4 changed to the inactive state, because the physical state of the port is down. 

%Jun 30 22:00:38:666 2020 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE2/0/5 of aggregation group BAGG5 changed to the inactive state, because the physical state of the port is down. 

%Jun 30 22:00:38:675 2020 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE2/0/17 of aggregation group BAGG6 changed to the inactive state, because the physical state of the port is down. 

%Jun 30 22:00:38:676 2020 H3C DEV/2/BOARD_STATE_FAULT: Board state changed to Fault on slot 2, type is MAIN_BOARD_TYPE_S5500V2_48P_SI. 

%Jun 30 22:00:38:692 2020 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE2/0/18 of aggregation group BAGG7 changed to the inactive state, because the physical state of the port is down. 

%Jun 30 22:00:38:711 2020 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE2/0/19 of aggregation group BAGG8 changed to the inactive state, because the physical state of the port is down. 

%Jun 30 22:00:38:730 2020 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE2/0/20 of aggregation group BAGG9 changed to the inactive state, because the physical state of the port is down.

 %Jun 30 22:00:38:741 2020 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port GE2/0/21 of aggregation group BAGG10 changed to the inactive state, because the physical state of the port is down. 

%Jun 30 22:00:38:778 2020 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port XGE2/0/51 of aggregation group BAGG100 changed to the inactive state, because the physical state of the port is down. 

%Jun 30 22:00:44:778 2020 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet1/0/52 changed to up. 

%Jun 30 22:00:44:779 2020 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/52 changed to up. 

%Jun 30 22:00:44:911 2020 H3C STM/6/STM_LINK_UP: IRF port 1 came up. %Jun 30 22:00:44:991 2020 H3C STM/4/STM_MERGE: IRF merge occurred. 

%Jun 30 22:00:49:307 2020 H3C STM/3/STM_LINK_DOWN: IRF port 1 went down. 

%Jun 30 22:00:49:318 2020 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet1/0/52 changed to down. 

%Jun 30 22:00:49:319 2020 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/52 changed to down. %Jun 30 22:01:10:966 2020 H3C DEV/3/BOARD_REMOVED: Board was removed from slot 2, type is unknown. 

%Jun 30 22:02:00:617 2020 H3C STM/6/STM_LINK_UP: IRF port 1 came up. 

%Jun 30 22:02:00:621 2020 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet1/0/52 changed to up. 

%Jun 30 22:02:00:629 2020 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/52 changed to up. 

%Jun 30 22:02:21:361 2020 H3C DEV/2/BOARD_STATE_FAULT: Board state changed to Fault on slot 2, type is unknown. 

%Jun 30 22:02:33:624 2020 H3C DEV/5/BOARD_STATE_NORMAL: Board state changed to Normal on slot 2, type is MAIN_BOARD_TYPE_S5500V2_48P_SI. 

%Jun 30 22:02:34:189 2020 H3C DEV/2/POWER_FAILED: -Slot=2; Power 2 failed. %Jun 30 22:02:35:811 2020 H3C OPTMOD/4/MODULE_IN: -Slot=2; Ten-GigabitEthernet2/0/52: The transceiver is STACK_SFP_PLUS. 

%Jun 30 22:02:36:739 2020 H3C OPTMOD/4/MODULE_IN: -Slot=2; Ten-GigabitEthernet2/0/51: The transceiver is 10G_BASE_SR_SFP. 

%Jun 30 22:05:10:716 2020 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: Nearest bridge agent neighbor created on port Ten-GigabitEthernet1/0/52 (IfIndex 52), neighbor's chassis ID is 441a-fa63-8dfc, port ID is Ten-GigabitEthernet2/0/52.  

%Jun 30 22:05:10:705 2020 H3C OPTMOD/4/PHONY_MODULE: -Slot=2; Ten-GigabitEthernet2/0/51: This transceiver is NOT sold by H3C. H3C therefore shall NOT guarantee the normal function of the device or assume the maintenance responsibility thereof! 

%Jun 30 22:05:10:729 2020 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet2/0/52 changed to up. 

%Jun 30 22:05:10:730 2020 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet2/0/52 changed to up. 

%Jun 30 22:05:10:910 2020 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten-GigabitEthernet2/0/51 changed to up. 

%Jun 30 22:05:11:040 2020 H3C HA/5/HA_BATCHBACKUP_STARTED: Batch backup of standby board in slot 2 started. 

%Jun 30 22:05:12:018 2020 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=2; Nearest bridge agent neighbor created on port Ten-GigabitEthernet2/0/51 (IfIndex 116), neighbor's chassis ID is 684f-64b2-b011, port ID is TenGigabitEthernet 2/46. 

%Jun 30 22:05:12:383 2020 H3C LLDP/6/LLDP_CREATE_NEIGHBOR: -Slot=2; Nearest bridge agent neighbor created on port Ten-GigabitEthernet2/0/52 (IfIndex 117), neighbor's chassis ID is 441a-fa63-8dfc, port ID is Ten-GigabitEthernet1/0/52.  

%Jun 30 22:05:13:901 2020 H3C LAGG/6/LAGG_ACTIVE: Member port XGE2/0/51 of aggregation group BAGG100 changed to the active state. 

%Jun 30 22:05:13:932 2020 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet2/0/51 changed to up. 

%Jun 30 22:05:15:318 2020 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet2/0/5 changed to up. 

%Jun 30 22:05:15:643 2020 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet2/0/17 changed to up. 

%Jun 30 22:05:15:723 2020 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet2/0/18 changed to up. 

%Jun 30 22:05:15:758 2020 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet2/0/19 changed to up. 

%Jun 30 22:05:15:772 2020 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet2/0/20 changed to up. 

%Jun 30 22:05:15:783 2020 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet2/0/21 changed to up. 

%Jun 30 22:05:15:955 2020 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet2/0/1 changed to up. 

%Jun 30 22:05:15:956 2020 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet2/0/2 changed to up. 

%Jun 30 22:05:15:960 2020 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet2/0/3 changed to up. 

%Jun 30 22:05:15:963 2020 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet2/0/4 changed to up.

 %Jun 30 22:05:18:315 2020 H3C LAGG/6/LAGG_ACTIVE: Member port GE2/0/5 of aggregation group BAGG5 changed to the active state. %Jun 30 22:05:18:325 2020 H3C LAGG/6/LAGG_ACTIVE: Member port GE2/0/17 of aggregation group BAGG6 changed to the active state. %Jun 30 22:05:18:336 2020 H3C LAGG/6/LAGG_ACTIVE: Member port GE2/0/18 of aggregation group BAGG7 changed to the active state. %Jun 30 22:05:18:347 2020 H3C LAGG/6/LAGG_ACTIVE: Member port GE2/0/19 of aggregation group BAGG8 changed to the active state. %Jun 30 22:05:18:363 2020 H3C LAGG/6/LAGG_ACTIVE: Member port GE2/0/20 of aggregation group BAGG9 changed to the active state. %Jun 30 22:05:18:377 2020 H3C LAGG/6/LAGG_ACTIVE: Member port GE2/0/21 of aggregation group BAGG10 changed to the active state. %Jun 30 22:05:18:388 2020 H3C LAGG/6/LAGG_ACTIVE: Member port GE2/0/1 of aggregation group BAGG1 changed to the active state. 

%Jun 30 22:05:18:397 2020 H3C LAGG/6/LAGG_ACTIVE: Member port GE2/0/2 of aggregation group BAGG2 changed to the active state. 

%Jun 30 22:05:18:407 2020 H3C LAGG/6/LAGG_ACTIVE: Member port GE2/0/3 of aggregation group BAGG3 changed to the active state. 

%Jun 30 22:05:18:418 2020 H3C LAGG/6/LAGG_ACTIVE: Member port GE2/0/4 of aggregation group BAGG4 changed to the active state. 

%Jun 30 22:05:18:744 2020 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet2/0/5 changed to up. 

%Jun 30 22:05:18:768 2020 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet2/0/17 changed to up.

 %Jun 30 22:05:18:807 2020 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet2/0/18 changed to up. 

%Jun 30 22:05:18:811 2020 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet2/0/19 changed to up. 

%Jun 30 22:05:18:824 2020 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet2/0/20 changed to up. 

%Jun 30 22:05:18:882 2020 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet2/0/21 changed to up. 

%Jun 30 22:05:18:909 2020 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet2/0/1 changed to up. 

%Jun 30 22:05:18:945 2020 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet2/0/2 changed to up. 

%Jun 30 22:05:18:959 2020 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet2/0/3 changed to up. 

%Jun 30 22:05:19:047 2020 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet2/0/4 changed to up. 

%Jun 30 22:05:24:046 2020 H3C HA/5/HA_BATCHBACKUP_FINISHED: Batch backup of standby board in slot 2 has finished. 

两台S5500V2-48P-SI做堆叠之后，其中一台设备没有规律的不定时重启。是什么问题？ 报错信息：