H3C的F1005怎么查看占用端口带宽最高的IP是什么？

可以通过如下命令查看：

<H3C>dis int g1/0/4
GigabitEthernet1/0/4 current state: UP
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 9428-2e1e-5ee0
Description: GigabitEthernet1/0/4 Interface
Loopback is not set
Media type is twisted pair, promiscuous mode set
1000Mbps-speed mode, full-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
Flow-control is not enabled
The Maximum Frame Length is 4096
Broadcast MAX-ratio: 100%
Unicast MAX-ratio: 100%
Multicast MAX-ratio: 100%
Allow jumbo frame to pass
PVID: 1
Port link-type: trunk
VLAN passing : 1(default vlan), 50, 70
VLAN permitted: 1(default vlan), 50, 70
Trunk port encapsulation: IEEE 802.1q
Port priority: 0
Last clearing of counters: Never
Last 300 seconds input: 1544 packets/sec 1381498 bytes/sec 1%
Last 300 seconds output: 1570 packets/sec 1422568 bytes/sec 1%
Input (total): 4583668891 packets, 3659768823034 bytes
4315595846 unicasts, 108239322 broadcasts, 159833723 multicasts, - pauses
Input (normal): 4583668891 packets, 3659763978422 bytes
4315595846 unicasts, 108239322 broadcasts, 159833723 multicasts, - pauses
Input: 0 input errors, 0 runts, 0 giants, - throttles
0 CRC, - frame, 0 overruns, - aborts
- ignored, - parity errors
Output (total): 4493326307 packets, 3676128737590 bytes
4476813299 unicasts, 5307826 broadcasts, 11205291 multicasts, 0 pauses
Output (normal): 4493326307 packets, 3676128737590 bytes
4476813299 unicasts, 5307826 broadcasts, 11205291 multicasts, 0 pauses
Output: 0 output errors, 0 underruns, - buffer failures
- aborts, 0 deferred, 0 collisions, 0 late collisions
- lost carrier, - no carrier

带宽情况如下参数：

Last 300 seconds input: 1544 packets/sec 1381498 bytes/sec 1%
Last 300 seconds output: 1570 packets/sec 1422568 bytes/sec 1%