您好,请知:
  
  
   以下是交换机恢复出厂设置的方法,请参考:
  
  
   方法一:
  
  
   <H3C>reset saved-configuration   //清空交换机配置
  
  
   The saved configuration file will be erased. Are you sure? [Y/N]:y   //设备提示保存的配置将会被删除,是否继续。
  
  
   Configuration file in flash: is being cleared. Please wait ... 
  
  
   MainBoard:
  
  
    Configuration file is cleared.   //配置已被清空
  
  
   
  
  
   <H3C>reboot   //重启交换机
  
  
   Start to check configuration with next startup configuration file, please wait.........DONE!
  
  
    Current configuration may be lost after the reboot, save current configuration? [Y/N]:n   //设备提示会在重启后丢失当前配置,是否保存当前配置,选择n
  
  
   This command will reboot the device. Continue? [Y/N]:y   //设备提示设备将会重启,是否继续,选择Y
  
  
   Now rebooting, please wait... 
  
  
   %Dec 14 20:48:39:352 2019 SW1 DEV/5/SYSTEM_REBOOT: System is rebooting now. 
  
  
   
  
  
   方法二:
  
  
   <H3C>dir  //通过dir命令查看交换机的文件
  
  
   Directory of flash:
  
  
      0 drw-           - Dec 14 2019 20:37:24   diagfile
  
  
      1 -rw-        1554 Dec 14 2019 20:50:06   ifindex.dat
  
  
      2 -rw-       21632 Dec 14 2019 20:37:24   licbackup
  
  
      3 drw-           - Dec 14 2019 20:37:24   license
  
  
      4 -rw-       21632 Dec 14 2019 20:37:24   licnormal
  
  
      5 drw-           - Dec 14 2019 20:48:38   logfile
  
  
      6 -rw-           0 Dec 14 2019 20:37:24   s5820v2_5830v2-cmw710-boot-a7514.bin
  
  
      7 -rw-           0 Dec 14 2019 20:37:24   s5820v2_5830v2-cmw710-system-a7514.bin
  
  
      8 drw-           - Dec 14 2019 20:37:24   seclog
  
  
      9 -rw-        6118 Dec 14 2019 20:50:06   startup.cfg  //这个是启动的交换机配置,我们要删除此文件
  
  
     10 -rw-      110464 Dec 14 2019 20:50:06   startup.mdb
  
  
    
  
  
   1046512 KB total (1046300 KB free)
  
  
   
  
  
   <H3C>delete startup.cfg   //使用删除命令删除startup.cfg这个启动运行的配置文件
  
  
   Delete flash:/startup.cfg? [Y/N]:y   //设备提示是否要删除,选择Y
  
  
   Deleting file flash:/startup.cfg... Done.   //设备提示startup.cfg这个文件已删除完成
  
  
   
  
  
   <H3C>reboot   //重启交换机
  
  
   Start to check configuration with next startup configuration file, please wait.........DONE!
  
  
    Current configuration may be lost after the reboot, save current configuration? [Y/N]:n   //设备提示会在重启后丢失当前配置,是否保存当前配置,选择n
  
  
   This command will reboot the device. Continue? [Y/N]:y   //设备提示设备将会重启,是否继续,选择Y
  
  
   Now rebooting, please wait... 
  
 
						 
						
暂无评论