问题描述：
请问大家！wt1024上行和核心做端口聚合，需要怎么做！是直接在wt 1024 通过console配置成聚合端口组？还是需要先接一组光纤，通过ac配置后再接入第二组光纤？
组网及组网描述：
- 2020-08-16提问
- 举报
-
(0)
最佳答案
正常配置，但要注意：
WT的上行口建议配置为Trunk模式，上连交换机形成链路聚合。
WTU口仅支持配置为Access模式，同时WTU口默认开启端口隔离且无法通过命令行修改
- 2020-08-16回答
- 评论(8)
- 举报
-
(0)
我尝试配置了端口聚合！打了Trunk! 还配置了管理vlan！和两个vlan ,但是本体莫名自动重启！
因项目需要！第一次接触交换机配置！而且目前关于本体的资料好像不太多！所以我想问下！我在在本体上的这些配置是不是必须要做的基本配置！谢谢解答！
交换机和本体都需要做聚合
我当时打算在本体配置好端口聚合！放通注册vlan和业务vlan后再去核心上做好聚合然后在接入光纤的！结果没配置完它就自动重启了！
你好！这个是我今天查看到的日志信息！能帮我分析下吗！ %Jan 1 00:10:04:958 2014 H3C CWC/6/CWC_AP_REBOOT: AP in state Idle is rebooting. Reason: Stayed in idle state for a long time. %Jan 1 00:10:05:018 2014 H3C APMGR/6/APMGR_LOG_REBOOTCAUSE: Set Wlan Reboot Cause, SubSlot = 65535, DevRebootCause = 0, WlanRebootCause = 2, ulRet = 0. %Jan 1 00:10:05:106 2014 H3C DEV/5/SYSTEM_REBOOT: System is rebooting now. 2014 H3C LAGG/6/LAGG_INACTIVE_AICFG: Member port XGE1/0/4 of aggregation group BAGG1 changed to the inactive state, because the member port and the aggregate interface have different attribute configurations. %Jan 1 00:00:09:957 2014 H3C OPTMOD/4/MODULE_IN: Ten-GigabitEthernet1/0/3: The transceiver is 1000_BASE_LX_SFP. %Jan 1 00:00:10:392 2014 H3C OPTMOD/4/MODULE_IN: Ten-GigabitEthernet1/0/4: The transceiver is 1000_BASE_LX_SFP. %Jan 1 00:00:10:676 2014 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten- GigabitEthernet1/0/3 changed to up. %Jan 1 00:00:10:682 2014 H3C LAGG/6/LAGG_ACTIVE: Member port XGE1/0/3 of aggregation group BAGG1 changed to the active state. %Jan 1 00:00:10:697 2014 H3C LAGG/6/LAGG_INACTIVE_PARTNER: Member port XGE1/0/3 of aggregation group BAGG1 changed to the inactive state, because the aggregation configuration of its peer port is incorrect. %Jan 1 00:00:10:700 2014 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/3 changed to up. %Jan 1 00:00:10:701 2014 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/3 changed to down. %Jan 1 00:00:10:704 2014 H3C LAGG/6/LAGG_ACTIVE: Member port XGE1/0/3 of aggregation group BAGG1 changed to the active state. %Jan 1 00:00:10:710 2014 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/3 changed to up. %Jan 1 00:00:10:710 2014 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Bridge- Aggregation1 changed to up. %Jan 1 00:00:10:710 2014 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Bridge-Aggregation1 changed to up. %Jan 1 00:00:10:711 2014 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Vlan- interface1 changed to up. %Jan 1 00:00:10:711 2014 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Vlan-interface1 changed to up. %Jan 1 00:00:12:808 2014 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten- GigabitEthernet1/0/4 changed to up. %Jan 1 00:00:12:826 2014 H3C LAGG/6/LAGG_ACTIVE: Member port XGE1/0/4 of aggregation group BAGG1 changed to the active state. %Jan 1 00:00:12:828 2014 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/4 changed to up. %Jan 1 00:00:29:908 2014 H3C SHELL/5/SHELL_LOGIN: Console logged in from con0. %Jan 1 00:00:34:717 2014 H3C SHELL/6/SHELL_CMD: -Line=con0-IPAddr=**-User=**; Command is
亲~登录后才可以操作哦!
确定你的邮箱还未认证，请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
- 1. 您举报的内容是什么？（请在邮件中列出您举报的内容和链接地址）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
- 3. 是哪家企业？（营业执照，单位登记证明等证件）
- 4. 您与该企业的关系是？（您是企业法人或被授权人，需提供企业委托授权书）
抄袭了我的内容
×
原文链接或出处
诽谤我
×
- 1. 您举报的内容以及侵犯了您什么权益？（请在邮件中列出您举报的内容、链接地址，并给出简短的说明）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
对根叔社区有害的内容
×
不规范转载
×
举报说明
你好！这个是我今天查看到的日志信息！能帮我分析下吗！ %Jan 1 00:10:04:958 2014 H3C CWC/6/CWC_AP_REBOOT: AP in state Idle is rebooting. Reason: Stayed in idle state for a long time. %Jan 1 00:10:05:018 2014 H3C APMGR/6/APMGR_LOG_REBOOTCAUSE: Set Wlan Reboot Cause, SubSlot = 65535, DevRebootCause = 0, WlanRebootCause = 2, ulRet = 0. %Jan 1 00:10:05:106 2014 H3C DEV/5/SYSTEM_REBOOT: System is rebooting now. 2014 H3C LAGG/6/LAGG_INACTIVE_AICFG: Member port XGE1/0/4 of aggregation group BAGG1 changed to the inactive state, because the member port and the aggregate interface have different attribute configurations. %Jan 1 00:00:09:957 2014 H3C OPTMOD/4/MODULE_IN: Ten-GigabitEthernet1/0/3: The transceiver is 1000_BASE_LX_SFP. %Jan 1 00:00:10:392 2014 H3C OPTMOD/4/MODULE_IN: Ten-GigabitEthernet1/0/4: The transceiver is 1000_BASE_LX_SFP. %Jan 1 00:00:10:676 2014 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten- GigabitEthernet1/0/3 changed to up. %Jan 1 00:00:10:682 2014 H3C LAGG/6/LAGG_ACTIVE: Member port XGE1/0/3 of aggregation group BAGG1 changed to the active state. %Jan 1 00:00:10:697 2014 H3C LAGG/6/LAGG_INACTIVE_PARTNER: Member port XGE1/0/3 of aggregation group BAGG1 changed to the inactive state, because the aggregation configuration of its peer port is incorrect. %Jan 1 00:00:10:700 2014 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/3 changed to up. %Jan 1 00:00:10:701 2014 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/3 changed to down. %Jan 1 00:00:10:704 2014 H3C LAGG/6/LAGG_ACTIVE: Member port XGE1/0/3 of aggregation group BAGG1 changed to the active state. %Jan 1 00:00:10:710 2014 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/3 changed to up. %Jan 1 00:00:10:710 2014 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Bridge- Aggregation1 changed to up. %Jan 1 00:00:10:710 2014 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Bridge-Aggregation1 changed to up. %Jan 1 00:00:10:711 2014 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Vlan- interface1 changed to up. %Jan 1 00:00:10:711 2014 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Vlan-interface1 changed to up. %Jan 1 00:00:12:808 2014 H3C IFNET/3/PHY_UPDOWN: Physical state on the interface Ten- GigabitEthernet1/0/4 changed to up. %Jan 1 00:00:12:826 2014 H3C LAGG/6/LAGG_ACTIVE: Member port XGE1/0/4 of aggregation group BAGG1 changed to the active state. %Jan 1 00:00:12:828 2014 H3C IFNET/5/LINK_UPDOWN: Line protocol state on the interface Ten-GigabitEthernet1/0/4 changed to up. %Jan 1 00:00:29:908 2014 H3C SHELL/5/SHELL_LOGIN: Console logged in from con0. %Jan 1 00:00:34:717 2014 H3C SHELL/6/SHELL_CMD: -Line=con0-IPAddr=**-User=**; Command is