• 全部
  • 经验案例
  • 典型配置
  • 技术公告
  • FAQ
  • 漏洞说明
  • 全部
  • 全部
  • 大数据引擎
  • 知了引擎
产品线
搜索
取消
案例类型
发布者
是否解决
是否官方
时间
搜索引擎
匹配模式
高级搜索

某局点S5130S-EI备机发生握手重启

  • 0关注
  • 0收藏 1563浏览
粉丝:14人 关注:4人

组网及说明

问题描述

客户反馈有一组S5130S-EI备机发生握手重启。

Slot 2:

Uptime is 0 weeks,0 days,6 hours,7 minutes

S5130S-28P-EI with 1 Processor

BOARD TYPE:         S5130S-28P-EI

DRAM:               512M bytes

FLASH:              256M bytes

PCB 1 Version:      VER.B

Bootrom Version:    121

CPLD 1 Version:     001

Release Version:    H3C S5130S-28P-EI-6126P20

Patch Version  :    None

Reboot Cause  :     DEVHandShakeReboot

过程分析

(1)        查看堆叠线缆,客户配了两条堆叠口,但实际只用了一条

  ===============display irf cOnfiguration=============== 

 MemberID NewID    IRF-Port1                     IRF-Port2

 1        1        GigabitEthernet1/0/25         disable                      

                   GigabitEthernet1/0/26                                      

 2        2        disable                       GigabitEthernet2/0/25         

                                                 GigabitEthernet2/0/26  

(2)        查看logfile,发现设备其实有过两次重启记录,都是因为堆叠线缆在UP/DOWN

两次重启的日志:

%@20664%Jan  9 20:08:03:255 2013 SW-14F-1 IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/25 changed to down.

%@20665%Jan  9 20:08:07:155 2013 SW-14F-1 STM/3/STM_LINK_DOWN: IRF port 1 went down.

%@20666%Jan  9 20:08:07:282 2013 SW-14F-1 DEV/5/BOARD_REBOOT: Board is rebooting on slot 2.

%@20664%Jan  9 20:08:03:255 2013 SW-14F-1 IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/25 changed to down.

%@20665%Jan  9 20:08:07:155 2013 SW-14F-1 STM/3/STM_LINK_DOWN: IRF port 1 went down.

%@20666%Jan  9 20:08:07:282 2013 SW-14F-1 DEV/5/BOARD_REBOOT: Board is rebooting on slot 2.

设备上其他端口也频繁报UP/DOWN

%@20507%Jan  9 19:48:47:446 2013 SW-14F-1 IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet2/0/6 changed to down.

%@20508%Jan  9 19:48:47:451 2013 SW-14F-1 IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet2/0/6 changed to down.

%@20509%Jan  9 19:48:52:887 2013 SW-14F-1 IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet2/0/6 changed to up.

%@20510%Jan  9 19:48:52:888 2013 SW-14F-1 IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet2/0/6 changed to up.

%@20511%Jan  9 19:49:20:678 2013 SW-14F-1 IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/16 changed to up.

%@20512%Jan  9 19:49:20:683 2013 SW-14F-1 IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/16 changed to up.

%@20513%Jan  9 19:49:21:551 2013 SW-14F-1 IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/16 changed to down.

%@20514%Jan  9 19:49:21:552 2013 SW-14F-1 IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/16 changed to down.

%@20515%Jan  9 19:49:51:635 2013 SW-14F-1 IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/16 changed to up.

%@20516%Jan  9 19:49:51:635 2013 SW-14F-1 IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/16 changed to up.

%@20517%Jan  9 19:49:52:421 2013 SW-14F-1 IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/16 changed to down.

%@20518%Jan  9 19:49:52:422 2013 SW-14F-1 IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/16 changed to down.

%@20519%Jan  9 19:50:46:886 2013 SW-14F-1 IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/16 changed to up.

%@20520%Jan  9 19:50:46:887 2013 SW-14F-1 IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/16 changed to up.

%@20521%Jan  9 19:50:47:698 2013 SW-14F-1 IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/16 changed to down.

%@20522%Jan  9 19:50:47:700 2013 SW-14F-1 IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/16 changed to down.

%@20523%Jan  9 19:51:26:066 2013 SW-14F-1 IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/16 changed to up.

%@20524%Jan  9 19:51:26:072 2013 SW-14F-1 IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/16 changed to up.

%@20525%Jan  9 19:51:26:873 2013 SW-14F-1 IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/16 changed to down.

%@20526%Jan  9 19:51:26:874 2013 SW-14F-1 IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/16 changed to down.

%@20527%Jan  9 19:52:32:981 2013 SW-14F-1 IFNET/3/PHY_UPDOWN: Physical state on the interface GigabitEthernet1/0/16 changed to up.

%@20528%Jan  9 19:52:32:982 2013 SW-14F-1 IFNET/5/LINK_UPDOWN: Line protocol state on the interface GigabitEthernet1/0/16 changed to up.

(3)        堆叠线缆频繁UP/DOWN会导致设备发生握手重启,通过logfile中看到很多端口UP/DOWN,可以判断是因为线缆原因造成设备重启。

解决方法

更换堆叠线缆后,故障不再复现。

该案例对您是否有帮助:

您的评价:1

若您有关于案例的建议,请反馈:

0 个评论

该案例暂时没有网友评论

编辑评论

举报

×

侵犯我的权益 >
对根叔知了社区有害的内容 >
辱骂、歧视、挑衅等(不友善)

侵犯我的权益

×

泄露了我的隐私 >
侵犯了我企业的权益 >
抄袭了我的内容 >
诽谤我 >
辱骂、歧视、挑衅等(不友善)
骚扰我

泄露了我的隐私

×

您好,当您发现根叔知了上有泄漏您隐私的内容时,您可以向根叔知了进行举报。 请您把以下内容通过邮件发送到zhiliao@h3c.com 邮箱,我们会尽快处理。
  • 1. 您认为哪些内容泄露了您的隐私?(请在邮件中列出您举报的内容、链接地址,并给出简短的说明)
  • 2. 您是谁?(身份证明材料,可以是身份证或护照等证件)

侵犯了我企业的权益

×

您好,当您发现根叔知了上有关于您企业的造谣与诽谤、商业侵权等内容时,您可以向根叔知了进行举报。 请您把以下内容通过邮件发送到 zhiliao@h3c.com 邮箱,我们会在审核后尽快给您答复。
  • 1. 您举报的内容是什么?(请在邮件中列出您举报的内容和链接地址)
  • 2. 您是谁?(身份证明材料,可以是身份证或护照等证件)
  • 3. 是哪家企业?(营业执照,单位登记证明等证件)
  • 4. 您与该企业的关系是?(您是企业法人或被授权人,需提供企业委托授权书)
我们认为知名企业应该坦然接受公众讨论,对于答案中不准确的部分,我们欢迎您以正式或非正式身份在根叔知了上进行澄清。

抄袭了我的内容

×

原文链接或出处

诽谤我

×

您好,当您发现根叔知了上有诽谤您的内容时,您可以向根叔知了进行举报。 请您把以下内容通过邮件发送到zhiliao@h3c.com 邮箱,我们会尽快处理。
  • 1. 您举报的内容以及侵犯了您什么权益?(请在邮件中列出您举报的内容、链接地址,并给出简短的说明)
  • 2. 您是谁?(身份证明材料,可以是身份证或护照等证件)
我们认为知名企业应该坦然接受公众讨论,对于答案中不准确的部分,我们欢迎您以正式或非正式身份在根叔知了上进行澄清。

对根叔知了社区有害的内容

×

垃圾广告信息
色情、暴力、血腥等违反法律法规的内容
政治敏感
不规范转载 >
辱骂、歧视、挑衅等(不友善)
骚扰我
诱导投票

不规范转载

×

举报说明

提出建议

    +

亲~登录后才可以操作哦!

确定

亲~检测到您登陆的账号未在http://hclhub.h3c.com进行注册

注册后可访问此模块

跳转hclhub

你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作