• 全部
  • 经验案例
  • 典型配置
  • 技术公告
  • FAQ
  • 漏洞说明
  • 全部
  • 全部
  • 大数据引擎
  • 知了引擎
产品线
搜索
取消
案例类型
发布者
是否解决
是否官方
时间
搜索引擎
匹配模式
高级搜索

AP FIT mode switch to FAT mode Configuration Example (bootrom)

2020-03-18 Published
  • 0关注
  • 0收藏 2148浏览
周天 五段
粉丝:0人 关注:0人

Network Topology


This case applies to APs of the WA5300 and WA5600 series.


Configuration Steps

Operational risk reminder: AP FIT mode switch to FAT mode is risky, improper operation or accidental power failure will cause equipment 

failure, and operation needs to be cautious. The command line upgrade requires a TFTP server on the PC (3CDaemon is recommended for users to set up a TFTP server)

Download the software version into the device flash, load the host software version, and the file name entered during loading must be 

consistent. It is recommended to copy and paste, and then avoid power off and reboot during the upgrade process.

 

1)    First download the fat version of WA5300 from the official website, download the compressed package WA5300-CMW710-R2417P01- FAT.zip, decompressing it to generate an ipe file. After downloading it to the computer, you need to modify the file name to 

     wa5300-fat.ipe. Please note that the file name is modified correctly and put it on your computer desktop.

2)    The computer is connected to a network port of the AP through a network cable. The address of the computer"s network card is set to: 192.168.0.1/255.255.255.0. Open the TFTP server as shown in the figure below, put the ipe software version on the computer desktop, 

     point the TFTP server directory to the computer desktop, and click OK.


3)    Reboot the AP, when "Press Ctrl + B to access EXTENDED-BOOTWARE MENU ..." appears, press to enter the BootWare 

main menu:

=======================================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Skip Authentication for Console Login                                 |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

===================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Enter your choice(0-9):  Ctrl+F // Press Ctrl+F to Format flash

Warning:All files on flash will be lost! Are you sure to format? [Y/N]Y //input Y

...........................................................................................................................

Format success.

 

=======================================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Skip Authentication for Console Login                                 |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

===================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Enter your choice(0-9):  Ctrl + Y // Press Ctrl+Y to set ap fat mode or fit mode

Please select the new mode

Current mode is Fit

============================================================================

|NO.  Mode                                                                 |

|1    Fat Mode                                                             |

|2    Fit Mode                                                             |

|0    Exit                                                                 |

============================================================================

Enter your choice(0-2):1 //Enter <1> in the AP mode switch menu to switch the working mode of the AP to FAT mode.

Changed to fat mode successfully!

 

4)    Enter the Modify Ethernet Parameters menu and use the TFTP network protocol to transmit wa5300-fat.ipe to the AP

=======================================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Skip Authentication for Console Login                                 |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

===================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Enter your choice(0-9): 3

 

====================================================   

|Note:the operating device is flash                                        |   

|<1> Download Image Program To SDRAM And Run                               |   

|<2> Update Main Image File                                                |   

|<3> Update Backup Image File                                              |   

|<4> Download Files(*.*)                                                   |   

|<5> Modify Ethernet Parameter                                             |   

|<0> Exit To Main Menu                                                     |   

|                    |   

============================================================================   

Enter your choice(0-5):5

 

================================

|Note:       "." = Clear field.

|            "-" = Go to previous field.

|          Ctrl+D = Quit.

===============================================================

Protocol (FTP or TFTP) : ftp TFTP

// Ignore the output, enter TFTP directly, and then press Enter

Load File Name         : wa5300-fat.ipe

// Ignore the output, enter wa5300-fat.ipe directly, and then press Enter

Target File Name       : wa5300-fat.ipe  

// Ignore the output, enter wa5300-fat.ipe directly, and then press Enter

Server IP Address      :192.168.0.1   

// Ignore the output, directly enter the IP of the computer host, such as 192.168.0.1, and then press Enter

Local IP Address       :192.168.0.50

// Ignore the output, directly enter the same network segment as the host computer"s ip, such as 192.168.0.50, and then press Enter

Gateway IP Address     :0.0.0.0

// Ignore the output and press Enter

Note that the computer must be manually configured with an IP address on the same network segment as the AP to ensure that the 

computer and the AP are reachable. 

=======================================

|Note:the operating device is flash

|<1> Download Application Program To SDRAM And

|<2> Update Main Application File

|<3> Update Backup Application File

|<4> Update Secure Application File

|<5> Modify Ethernet Parameter

|<0> Exit To Main Menu

|

 

=============================================================

Enter your choice(0-5): 2   // At this point you can see the scroll of data upload on the TFTP server

Loading.................................................................................................................Done.

38265856 bytes downloaded!

Image file wa5300-fat-boot.bin is self-decompressing...

Saving file flash:/wa5300-fat-boot.bin .................Done.

Image file wa5300-fat-system.bin is self-decompressing...

Saving file flash:/wa5300-fat-system.bin ..............................................................................................Done.

 

Select <0> to return to the main BootWare menu:

Enter your choice (0-5): 0

 

5)     Return to the main menu and reboot the device

=======================================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Skip Authentication for Console Login                                 |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

===================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Enter your choice(0-9): 0

System is starting...

Press ENTER to get started.

6)    After reboot the device, you can use the default management address 192.168.0.50 to log in to the AP for management. The default 

user name for logging in to the AP is admin and the password is h3capadmin.


Key Configuration

Ctrl + F to format flash, then Ctrl + Y to select fat mode, and finally load the fat version.

该案例对您是否有帮助:

您的评价:1

若您有关于案例的建议,请反馈:

0 comments

No comments

Add Comments:

举报

×

侵犯我的权益 >
对根叔知了社区有害的内容 >
辱骂、歧视、挑衅等(不友善)

侵犯我的权益

×

泄露了我的隐私 >
侵犯了我企业的权益 >
抄袭了我的内容 >
诽谤我 >
辱骂、歧视、挑衅等(不友善)
骚扰我

泄露了我的隐私

×

您好,当您发现根叔知了上有泄漏您隐私的内容时,您可以向根叔知了进行举报。 请您把以下内容通过邮件发送到zhiliao@h3c.com 邮箱,我们会尽快处理。
  • 1. 您认为哪些内容泄露了您的隐私?(请在邮件中列出您举报的内容、链接地址,并给出简短的说明)
  • 2. 您是谁?(身份证明材料,可以是身份证或护照等证件)

侵犯了我企业的权益

×

您好,当您发现根叔知了上有关于您企业的造谣与诽谤、商业侵权等内容时,您可以向根叔知了进行举报。 请您把以下内容通过邮件发送到 zhiliao@h3c.com 邮箱,我们会在审核后尽快给您答复。
  • 1. 您举报的内容是什么?(请在邮件中列出您举报的内容和链接地址)
  • 2. 您是谁?(身份证明材料,可以是身份证或护照等证件)
  • 3. 是哪家企业?(营业执照,单位登记证明等证件)
  • 4. 您与该企业的关系是?(您是企业法人或被授权人,需提供企业委托授权书)
我们认为知名企业应该坦然接受公众讨论,对于答案中不准确的部分,我们欢迎您以正式或非正式身份在根叔知了上进行澄清。

抄袭了我的内容

×

原文链接或出处

诽谤我

×

您好,当您发现根叔知了上有诽谤您的内容时,您可以向根叔知了进行举报。 请您把以下内容通过邮件发送到zhiliao@h3c.com 邮箱,我们会尽快处理。
  • 1. 您举报的内容以及侵犯了您什么权益?(请在邮件中列出您举报的内容、链接地址,并给出简短的说明)
  • 2. 您是谁?(身份证明材料,可以是身份证或护照等证件)
我们认为知名企业应该坦然接受公众讨论,对于答案中不准确的部分,我们欢迎您以正式或非正式身份在根叔知了上进行澄清。

对根叔知了社区有害的内容

×

垃圾广告信息
色情、暴力、血腥等违反法律法规的内容
政治敏感
不规范转载 >
辱骂、歧视、挑衅等(不友善)
骚扰我
诱导投票

不规范转载

×

举报说明

提出建议

    +

亲~登录后才可以操作哦!

确定

亲~检测到您登陆的账号未在http://hclhub.h3c.com进行注册

注册后可访问此模块

跳转hclhub

你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作