Precautions for configuring vlan in local forwarding mode map file
When the AP is forwarding locally, a map file needs to be issued. The most common configuration in the map file is to configure the VLAN allowed by the AP's uplink port.
E.g:
#apconfig.txtConfiguration:
system-view
vlan 200
quit
interface GigabitEthernet 1/0/1
port link-type trunk
port trunk permit vlan 200
But often see the following configuration:
system-view
vlan 1 to 4094
quit
interface GigabitEthernet 1/0/1
port link-type trunk
port trunk permit vlan all
Register through AP. Therefore, when configuring vlan in the map file, be careful not to issue all vlans, but to issue vlans as needed.
No comments
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作