1. 配置需求或说明
1.1 适用产品系列
本案例适用于如:HP/Aruba 2920 24G/48G Switch、
HP/Aruba 2920 24G/48G POE+ Switch、Aruba 2930F 24G/48G 4SFP(+) Switch、
Aruba 2930F 24G/48G 4SFP(+) PoE+ Switch、Aruba 2930M 24G/48G 1-slot Switch、
Aruba 2930M 24G/48G PoE+ 1-slot Switch等系列的交换机。
1.2 说明
两台交换机直连,因物理线路质量问题,直连端口频繁UP/DOWN,导致网络通信故障;
配置Fault-finder link-flap可以防止设备间直连端口或者链路的抖动。
无。
配置步骤
#进入全局模式
ProCurve# config
#将端口1到5配置为具有高灵敏度(10秒内有3次振荡)的链路振荡检测,并在超过链路波动阈值时记录并禁用端口65535秒 。
ProCurve(config)# fault-finder link-flap ethernet 1-5 action warn-and-disable 65535 sensitivity high
#将端口8配置为以中等灵敏度(10秒内有6次振荡)检测链路振荡,并在超出链路振荡阈值时记录并禁用端口;如果禁用,用户将需要重新启用端口。 ProCurve(config)# HP Switch(config)# fault-finder link-flap ethernet 8 action warn-and-disable 0 sensitivity medium
#将端口22配置为以较低的灵敏度(10秒内超过10次振荡)进行链路振荡检测,仅记录是否超出链路振荡阈值。
ProCurve(config)# HP Switch(config)# fault-finder link-flap ethernet 22 action warn sensitivity low
#保存配置
ProCurve(config)# write memory
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作