S5560X-EI
For a switch to manage access points (APs) by using the access controller (AC) functionality, you can install the WLAN feature image on the switch.
1.verify that the device is operating correctly and the device system is stable.
[H3C]display system stable state
System state : Stable
Redundancy state : No redundance
Slot CPU Role State
1 0 Active Stable
2.Use FTP or TFTP to transfer the feature image file to the root directory of a file system on the switch.
how to find the package? Download the switch firmware file and find the .uww file.
3.Activate the feature image.
Centralized IRF devices:
install activate feature filename&<1-30> slot slot-number
Distributed devices in standalone mode:
install activate feature filename&<1-30> slot slot-number
Distributed devices in IRF mode:
install activate feature filename&<1-30> chassis chassis-number slot slot-number
4.Commit the software changes.
install commit
1. If you want the activated feature pack to remain active after the system restarts, you must configure the install commit command.
2. Log in to the switch from the console port to install the feature image. If you use Telnet or SSH, you might be disconnected from the switch before the installation is completed.
3.Reference link:
https://www.h3c.com/en/Support/Resource_Center/EN/Home/Switches/00-Public/Configure/Configuration_Guides/H3C_Unified_Wired_Wireless_(R5417P03)-6W103/01/201907/1211817_294551_0.htm
No comments
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作