AC===SW===AP
1.
#Click "System"> "Network Security"> "Authentication"> "ISP Domain" to add an ISP domain. Create an authentication domain named local-mac, and configure the authentication, authorization, and accounting method for lan-access users as local authentication.
#Click the menu: Advanced settings. Configure the user idle cut-off time to 15 minutes, and the traffic generated during the idle cut-off time is 1024 bytes.
2. Configure local users
#Click "System">
"Network Security"> "User Management"> "Add
User", configure a network access type local user, the name is the
client"s MAC address, the password is the plain text password (same account),
and specify the user Can use lan-access service.
Note: By default, the username
format for MAC address authentication is lowercase without horizontal bars.
3.
#Click "All Networks">
"Wireless Configuration"> "Wireless Networks">
"Wireless Services",
Create the wireless service
template service, configure the SSID as MACservice,
and configure the wireless service template VLAN as 100, configure the client
access authentication method as MAC address authentication, and configure the
ISP domain used by MAC address authentication users as local-mac. Configure static PKS
authentication, enter the wifi password: 12345678, and enter the confirmation
password: 12345678, and then enable the wireless service template.
Enter advanced settings. Bind the service template to the ap, and select the ap to the right. Finally click OK.
Client access authentication method as MAC address authentication,
Configure the ISP domain used by MAC address authentication users as local-mac.
Configure static PKS authentication, enter the wifi password: 12345678,
then enable the wireless service template.
该案例对您是否有帮助:
您的评价:1
若您有关于案例的建议,请反馈:
No comments
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作