mull
After the main AC failure is restored, the AP and Client are still connected to the standby AC and cannot automatically switch back to main AC.
The AP priority configured on the main AC is not 7
Set the AP priority configured on the main AC to 7 (maximum value) . To make sure the priority configured on the main AC is higher than the other standby ACs. The specific configuration is as follows:
[Sysname]wlan ap AP1 model WA2620E-AGN
[Sysname-wlan-ap-ap1]priority level 7
No comments
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作