V7 AC re-modifies the content of the local forwarding MAP file. How to make it take effect?
First write the latest MAP file and upload it to the root directory of the AC. The new file name can be the same or different from the previous one. Then reconfigure the map-configuration command in the AP view or AP group view. Once this command is executed, the new MAP file takes effect immediately . Need to pay attention to the following two points:
1. Even if the new and old MAP file names are the same, if you just upload it to the AC root directory to overwrite the old MAP file and do not call it again through the map-configuration command, the content in the new MAP file will not be executed.
2. If the original configuration and the new configuration do not cover each other, the old configuration will still exist.
For example, the wired port of the original MAP file only releases vlan 200, and the new MAP file only releases vlan 300. If you only want to release vlan300 but do not want to release vlan 200, you need to execute the reset ap command on the AC. Because AP will restart after reset, the original configuration will not be saved.