[StoreEver] HPE MSL 5000/6000 Tape Libraries - Upgrading Firmware Using MSLUtil (Serial connection)

HPE MSL 5000/6000 Tape Libraries - Upgrading Firmware Using MSLUtil (Serial connection)

Using MSLUtil (Serial connection)

To update the firmware using the MSLUtil.exe following is required:
? MSLUtil.exe and the proper version of firmware. Click here to access HP Support Center website to obtain the latest firmware files. Navigate to the product model, then select the OS and click the download button in the firmware section.
? Cable assembly, serial RJ11 to DB9.
? PC with available serial port.
Firmware flashing procedure:

1. Install the MSLUtil.exe on the PC.
2. Copy the firmware image (*.bin) into the same directory that the MSLUtil.exe was installed.
3. Connect the library diagnostic port to the PC using the supplied cable assembly.
4. Start the MSLUtil.exe.
5. Click Connect, select the PC serial port that the cable assembly is connected to, and then click OK.
6. Click Download, Browse. Navigate to the directory with the firmware image *.bin.
NOTE: Obtain the latest firmware files on the HP Support website. Click here to access HP Support Center website to obtain the latest firmware files. Navigate to the product model then select the OS and click the download button in the firmware section. The download file may be a single file (Standalone drives) or a self-extracting bundle that includes both automation and standalone drive firmware.
7. Click OK. The library firmware automatically updates.

NOTE: If the flash process does not complete, select a lower baud rate option, available under the Connect window, and try again.
8. The library will reboot. Verify that the firmware level has been updated successfully by selecting the Library Info button from the view system data area of the GUI to view the firmware revision.

HPESC参考链接:

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=kc0121424en_us