两套4.2.2 版本primera做双活,
primera升级到4.2版本后,remote
copy group stop,尝试使用startrcopygroup
hpepri01dp cli% showtask -d 29697
Id
Type
Name Status Phase Step
-------StartTime------- ------FinishTime------- -Priority- -User-
29697 remote_copy_sync SFARM_TEST_11 failed --- ---
2021-01-29 22:09:46 CET 2021-01-29 22:10:33 CET
n/a n/a
Detailed status:
2021-01-29 22:09:46 CET Created task.
2021-01-29 22:09:46 CET Startup adding resync of volume
SFARM_TEST_11 in group RC_SFARM_TEST_11 to target hpepri01ds to the
synchronization list.
2021-01-29 22:09:46 CET Started resync of volume
SFARM_TEST_11 (offset 0MB length 4194304MB) in group RC_SFARM_TEST_11 to
target hpepri01ds has started. (sync_vol: none resync_vol:
rcpy.178.3277.1/22337.)
2021-01-29 22:10:33 CET Stopped This synchronization
was stopped by the sysmgr.
2021-01-29 22:10:33 CET Failed sync of volume
SFARM_TEST_11(rcpy.178.3277.1) in RC_SFARM_TEST_11 group to target hpepri01ds
failed, volume has status STALE.
这是一个Remote copy通信的问题,主存储和备存储之间的通信句柄出现异常,没有正常消失导致startrcopygroup失败。
三种方法:
①
controlport offline
controlport rst
② RCFC cable reseat of all cables; causing a Plogi to reestablish RC Peer communication
③ down/up all the RCFC port at the switch
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作