定时执行任务功能是指通过配置,设备可以在指定时刻或延迟指定时长以后,自动执行一个或一组命令的功能。启用此功能以后,设备能够在无人值守的情况下完成某些操作或配置。该功能不但增强了设备的自动控制和管理能力,提高了易用性,而且可以起到有效节能的作用。
如下典型配置是通过定时开关服务模板来控制无线服务的开关。
无。
每天08:00—20:00开 service-template 1,其他时间关闭。
配置步骤:
<AC> system-view
[AC] job service1_disable
[AC- job- service1_disable] view wlan-st-1
[AC- job- service1_disable] time 1 repeating at 20:00 command service-template disable
[AC- job- service1_disable] quit
[AC] job service1_enable
[AC- job- service1_enable] view wlan-st-1
[AC- job- service1_enable] time 1 repeating at 08:00 command service-template enable
[AC- job- service1_enable] quit
具体开关周期和时间点可以根据客户需求设计。
注意点:视图 view wlan-st-1要选择正确。
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作