知
iMC &U-Center TAM错误码含义
2021-08-10
发表
- 0关注
- 1收藏 2212浏览
问题描述
iMC &U-Center TAM错误码含义
解决方法
| ERROR_CODE | DESCRIPTION |
| 65000 | Process success |
| 65001 | Process failed |
| 65002 | Database abnormal. |
| 65003 | Client abort the session. |
| 65004 | User does not exist. |
| 65006 | User state is invalid. |
| 65007 | User or product is out of date. |
| 65008 | User is already written off. |
| 65009 | User is already forbidden. |
| 65010 | Packet content is not supported. |
| 65011 | No reply while expecting CONTINUE packet. |
| 65012 | User name is NULL. |
| 65013 | Password is NULL. |
| 65014 | The online number reaches the upper-limit. |
| 65015 | Incorrect password. |
| 65016 | Send packet fail. |
| 65017 | Authentication type is not supported. |
| 65018 | The user is not allowed to perform ENABLE authentication. |
| 65019 | The value of service arg is not supported. |
| 65020 | There is no cmd arg in authorize packet. |
| 65021 | Authorize fail directly according to config. |
| 65022 | There is no service arg in authorize packet. |
| 65023 | Incorrect password. You have been added into blacklist. |
| 65024 | Incorrect password. You can retry #Count of #MaxCount times. |
| 65025 | Incorrect LDAP password. You have been added into blacklist. |
| 65026 | Incorrect LDAP password. You can retry #Count of #MaxCount times. |
| 65027 | Incorrect LDAP password. |
| 65028 | There is no such a user on LDAP server. |
| 65029 | LDAP server does not support chap auth type. |
| 65030 | LDAP server connection timed out. Please retry later. |
| 65031 | LDAP configuration protocol error. |
| 65032 | LDAP server configuration error, please contact the administrator. |
| 65033 | LDAP configuration manager error. |
| 65034 | LDAP server operation error. |
| 65035 | LDAP server is disconnected. Please retry later or consult the administrator. |
| 65036 | Encode password fail. |
| 65037 | Decode password fail. |
| 65038 | Init des key fail. |
| 65039 | Invalid authentication type. |
| 65040 | Repeated auth package. |
| 65041 | System parameter does not exist. |
| 65042 | Ldap user has not sync yet. |
| 65043 | LDAP server not matched. It may not be the Microsoft Active Directory. |
| 65044 | License limited. |
| 65045 | The LDAP account has expired. |
| 65046 | Unknown user name or bad password. |
| 65047 | The LDAP account currently disabled. |
| 65048 | Your account has not taken effect,please retry in 15 minutes. |
| 65049 | The command is not allowed to run. |
| 65050 | The user is not online. |
| 65051 | The server is processing your last request, please retry later. |
| 65052 | RSA only supports pap auth type. |
| 65053 | RSA configuration is not found. Please contact the administrator. |
| 65054 | No response packet is received. |
| 65055 | RSA authentication failed. Please check your username and password or contact the administrator. |
| 65056 | Authenticator error. |
| 65057 | The privilege-increase password has expired. |
| 65058 | The password has expired. Please log in to the device user self-service center to modify the password. |
| 65059 | Wrong privilege-increase password. |
| 65060 | Failed to check IP address binding. |
| 65061 | The new password and the confirm password must be the same. |
| 65062 | The new password does not meet the requirements of the user password strategy. |
| 65063 | The server failed to update the new password. |
| 65064 | The highest privilege level set on the server is exceeded. |
| 66005 | User is already in the blacklist. |
| ERROR_CODE | REMARK |
| 65000 | 初始化的成功标识 |
| 65001 | 操作失败 |
| 65002 | 数据库异常。 |
| 65003 | 客户端终止此次会话。 |
| 65004 | 用户不存在。 |
| 65006 | 用户状态非法。 |
| 65007 | 用户已失效。 |
| 65008 | 用户状态为注销。 |
| 65009 | 用户状态为停用。 |
| 65010 | 报文内容不支持。 |
| 65011 | 没有收到CONTINUE报文。 |
| 65012 | 用户名为空。 |
| 65013 | 用户密码为空。 |
| 65014 | 在线用户数量限制。 |
| 65015 | 用户密码错误。 |
| 65016 | 发送报文失败。 |
| 65017 | 认证类型不支持。 |
| 65018 | 用户的权限提升功能没有启用。 |
| 65019 | 参数service取值不支持。 |
| 65020 | 授权报文中没有arg参数。 |
| 65021 | 配置的授权策略为拒绝。 |
| 65022 | 授权报文中没有service参数。 |
| 65023 | 用户密码错误，您已经被加入黑名单。 |
| 65024 | 密码错误，您还可以重试#Count次，最多可以重试#MaxCount次。 |
| 65025 | LDAP用户密码错误，您已经被加入黑名单。 |
| 65026 | LDAP用户密码错误，您还可以重试#Count次，最多可以重试#MaxCount次。 |
| 65027 | LDAP用户密码错误。 |
| 65028 | LDAP服务器上没有该用户名。 |
| 65029 | LDAP服务器上不支持chap认证。 |
| 65030 | LDAP服务器连接超时,请稍后重试。 |
| 65031 | LDAP服务器协议版本错误。 |
| 65032 | LDAP服务器配置信息错误，请联系网络管理员。 |
| 65033 | 管理员配置错误。 |
| 65034 | LDAP服务器的未知错误。 |
| 65035 | LDAP服务器处于未连通状态，请稍后重试或者通知管理员。 |
| 65036 | 加密密码失败。 |
| 65037 | 解密密码失败。 |
| 65038 | 初始des密钥失败。 |
| 65039 | 用户认证类型错误。 |
| 65040 | 重复认证报文。 |
| 65041 | 系统参数不存在。 |
| 65042 | LDAP用户没有同步。 |
| 65043 | LDAP服务器类型错误，可能该LDAP服务器不是微软活动目录。 |
| 65044 | license数达到上限。 |
| 65045 | LDAP用户已失效。 |
| 65046 | 用户名或密码错误。 |
| 65047 | LDAP用户已禁用。 |
| 65048 | 您的帐户还没有生效，请在15分钟后再试。 |
| 65049 | 该命令不允许执行。 |
| 65050 | 用户不在线。 |
| 65051 | 服务器正在处理您的上个请求，请稍后重试。 |
| 65052 | RSA只支持pap认证类型。 |
| 65053 | 未找到RSA服务配置信息, 请联系管理员。 |
| 65054 | 未接收到回应报文。 |
| 65055 | RSA认证失败，请确认输入了正确的用户名和密码，或者联系管理员。 |
| 65056 | 校验认证字错误。 |
| 65057 | 权限提升密码已失效。 |
| 65058 | 密码已过期，请登录设备用户自助服务平台进行修改。 |
| 65059 | 权限提升密码错误。 |
| 65060 | IP地址绑定检查失败。 |
| 65061 | 两次输入的新密码不一致。 |
| 65062 | 新密码不满足密码控制策略要求。 |
| 65063 | 服务器更新用户密码失败。 |
| 65064 | 权限提升违规，超过了服务器配置的最高权限级别。 |
| 66005 | 用户已被加入黑名单。 |
0
个评论
该案例暂时没有网友评论
编辑评论
✖
案例意见反馈
➤
✖
亲~登录后才可以操作哦!
确定
✖
✖
你的邮箱还未认证，请认证邮箱或绑定手机后进行当前操作
✖