无
VSI接口下配置,策略路由不生效,在PCTracert没有走配置中的下一跳
VSI接口下配置,策略路由不生效,在PCTracert没有走配置中的下一跳
1、策略路由下发正常,无报错
display ip policy-based-route interface Vsi-interface 3734
Policy-based routing information for interface Vsi-interface3734:
Policy name: test
node 10 permit:
if-match acl 3000
apply next-hop vpn-instance vpn-default 10.xx.xx.1
Matched: 0
Total matched: 0
2、设备带源ping策略路由下一跳可达
[spine-5.15]ping -vpn-instance vpn-default -a 10.xx.xx.2 10.xx.xx.1
Ping 10.xx.xx.1 (10.xx.xx.1) from 10.xx.xx.2: 56 data bytes, press CTRL+C to break
56 bytes from 10.xx. xx.1: icmp_seq=0 ttl=255 time=2.401 ms
56 bytes from 10. xx. xx.1: icmp_seq=1 ttl=255 time=1.860 ms
56 bytes from 10. xx. xx.1: icmp_seq=2 ttl=255 time=1.495 ms
56 bytes from 10. xx. xx.1: icmp_seq=3 ttl=255 time=1.412 ms
56 bytes from 10. xx. xx.1: icmp_seq=4 ttl=255 time=1.565 ms
3、PC地址在ACL范围
acl advanced 3000
rule 0 permit ip source 10.xx.xx.128 0.0.0.15
4、报文入接口绑定VPN,调用PBR
#
interface Vsi-interface3734
ip binding vpn-instance vpn-default
ip address 10.xx.xx.129 255.255.255.240
mac-address 0000-0000-0001
local-proxy-arp enable
ip policy-based-route test
local-proxy-nd enable
distributed-gateway local
5、下一跳所在接口绑定VPN
interface Vlan-interface55
description ceshi
ip binding vpn-instance vpn-default
ip address 10.xx.xx.2 255.255.255.0
#
int Ten-GigabitEthernet 2/0/0/35
port link-type access
port access vlan 55
6、acl资源充足,看配置指导未触发限制
[spine-5.15]display qos-acl resource chassis 2 slot 0
Interfaces: XGE2/0/0/1 to XGE2/0/0/48 (chassis 2 slot 0)
---------------------------------------------------------------------
Type Total Reserved Configured Remaining Usage
---------------------------------------------------------------------
VFP ACL 1024 768 0 256 75%
IFP ACL 16384 6144 5 10235 37%
IFP Meter 8192 3072 0 5120 37%
IFP Counter 8192 3072 0 5120 37%
EFP ACL 1024 0 0 1024 0%
EFP Meter 512 0 0 512 0%
EFP Counter 512 0 0 512 0%
116 Policy Based Routing V4 FALSE 10 66
117 Policy Based Routing V6 FALSE 10 67
int vsi 4092(终端网关对应的l3vpi 接口)调用策略路由
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作