组网及说明
本案例方法仅适用如下型号设备中存在console口的云AP
WAP611H、WAP611H-U、WAP811H、WAP622H、WAP622H-U、WAP622、WAP622-U、WAP822、WAP822H、WAP632H、 WAP812、WAP212H。
云AP黄灯常亮，reset恢复出厂设置之后依旧黄灯常亮，没有默认的wifi信号放出 ，这都是云AP丢失版本的表现。
如果发生版本丢失，当云AP存在console口时，我们可以进入bootware菜单手动更新版本。请注意仅当版本丢失时方可尝试串口进入bootware修复，操作存在风险请谨慎执行。云AP日常的维护和配置均在web，不可进入bootware。云AP正常启动后串口锁定，串口无打印信息。
配置步骤
1、波特率为57600，如果设置为其他波特率进入bootware菜单则会体现为乱码。提前搭建好TFTP服务器。
设备重启
****************************************************************************
* *
* H3C BootWare, Version 1.02 *
* *
****************************************************************************
Copyright (c) 2004-2020 New H3C Technologies Co., Ltd.
Compiled Date : Jun 18 2020
CPU Type : MIPS
CPU Clock Speed : 880MHz
Memory Type : DDR3 SDRAM
Memory Size : 128MB
Flash Size : 16MB
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU... //长按CTRL+ B进入bootware menu
Loading the main image files...
Loading...
Something wrong with the file.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> BootWare Operation Menu |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Enter your choice(0-4): 3 //选择3
==========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|
============================================================================
Enter your choice(0-3): 3 //选择3，设置以太网参数
==========================
|Note: "." = Clear field. |
| "-" = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :wap622h-ramdisk.bin
:WAP622-WPT330-R1324-OASIS.bin //提前从官网上下载对应版本到本地PC上，此处输入版本文件名称
Target File Name :wap622h-ramdisk.bin
:WAP622-WPT330-R1324-OASIS.bin //提前从官网上下载对应版本到本地PC上，此处输入版本文件名称
Server IP Address :192.168.1.123 10.40.92.2 //TFTP服务器（PC）的IP地址
Local IP Address :192.168.1.111 10.40.92.111 // 与TFTP Server同一网段的一个可用地址
Subnet Mask :0.0.0.0
Gateway IP Address :0.0.0.0
==========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|
============================================================================
Enter your choice(0-3): 2 //选择2，更新版本
Loading.....................................................................
............................................................................
............................................................................
............Done.
11797504 bytes downloaded!
Saving file WAP622-WPT330-R1324-OASIS.bin ..................................
............................................................................
...........................................................................
Done.
==========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|
============================================================================
Enter your choice(0-3): 0 //输入0
==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> BootWare Operation Menu |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Enter your choice(0-4): 0 //输入0 ，设备重启
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
DRAM SIZE : 134217728 byte
BOARD ID : 3
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing................Done.
Software System Reset Occurred
****************************************************************************
* *
* H3C BootWare, Version 1.02 *
* *
****************************************************************************
Copyright (c) 2004-2020 New H3C Technologies Co., Ltd.
Compiled Date : Jun 18 2020
CPU Type : MIPS
CPU Clock Speed : 880MHz
Memory Type : DDR3 SDRAM
Memory Size : 128MB
Flash Size : 16MB
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main image files...
Loading...
Extended BootWare Version is not equal,updating? [Y/N]
Updating Extended BootWare.......Done.
Basic BootWare Version is not equal,updating? [Y/N]
Updating Basic BootWare........Done.
BootWare updated,System is rebooting now.
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
DRAM SIZE : 134217728 byte
BOARD ID : 3
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing...................Done.
****************************************************************************
* *
* H3C BootWare, Version 1.03 *
* *
****************************************************************************
Copyright (c) 2004-2020 New H3C Technologies Co., Ltd.
Compiled Date : Sep 7 2020
CPU Type : MIPS
CPU Clock Speed : 880MHz
Memory Type : DDR3 SDRAM
Memory Size : 128MB
Flash Size : 16MB
BootWare Validating...
Normal Extended BootWare Version is newer than Backup Extended BootWare!
Begin to Update the Backup Extended BootWare.......Done.
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main image files...
Loading...Done.
System has started up. To manage the device, you can log in to the Oasis platform or log in to the Web interface of the device through the management Wi-Fi.出现此提示，表示版本更新成功，设备正常启动，并放出默认信号，用户可连接管理wifi登录本地web进行无线配置。
配置关键点
1、波特率为57600，如果设置为其他波特率进入bootware菜单则会体现为乱码。
该案例暂时没有网友评论
编辑评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证，请认证邮箱或绑定手机后进行当前操作