组网及说明
FIT和Cloud模式AP均可以在AC上线。FIT模式AP通过进行AC管理，Cloud模式AP无法通过AC管理，但可以通过AC进行工作模式切换和版本升级等简单操作。工作模式切换前，请配置AP在AC上线，并配置终端进入AC的命令行界面，如图所示。
通过AC命令行切换工作模式组网图：
配置步骤
AP注册上线后，通过如下方式进行切换云模式，即胖模式。
# 进入AC系统视图，执行wlan mode-switch ap cloud命令切换工作模式。
[AC] wlan mode-switch ap ap1 cloud
# 当出现如下提示信息时，键入
The operation will change the working mode to cloud.Continue? [Y/N]:
# 返回用户视图，执行reset wlan ap命令手动重启AP，使工作模式变更生效。
[AC] quit
1.1 现场无AC，且当前AP版本在2442以上
1.1.1 查看AP版本的命令是dis version，如下：
H3C Comware Software, Version 7.1.064, Release 2448P10 //2448P10即为当前AP版本
Copyright (c) 2004-2021 New H3C Technologies Co., Ltd. All rights reserved.
H3C WA6320 uptime is 0 weeks, 0 days, 0 hours, 0 minutes
Last reboot reason : User soft reboot
1.1.2 命令行切换云模式
直接在命令行中输入：
切换为云（FAT）模式：
[H3C]ap-mode cloud （Tab键无法补全）
通过配置终端进入设备的命令行界面，在系统视图下输入ap-mode { anchor-ac | cloud | fit }命令来切换AP的工作模式。AP重启后将使用出厂配置或上次切换为该模式时保存的配置。
1.1.3 Bootrom菜单下切换云模式
通过console口登录设备，在AP重启的时候按住不停地按Ctrl+B进入设备的bootroom菜单，以下标黑部分为设备自动打印部分。
==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): //按键Ctrl+Y，设置ap模式
Please select the new mode
Current mode is Fit Mode
============================================================================
|NO. Mode |
|1 Fit Mode |
|2 Anchor-AC (Virtual AC Mode) |
|3 Cloud Mode |
|0 Exit |
============================================================================
Enter your choice(0-3):3 //输入3，即cloud模式，即胖模式
Changed to cloud mode successfully! //切换成功
==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 0 //输入0，重启AP
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing....Done.
****************************************************************************
* *
* H3C WA6338-LI BootWare, Version 7.17 *
* *
****************************************************************************
Copyright (c) 2004-2021 New H3C Technologies Co., Ltd.
Compiled Date : Aug 31 2021
Memory Type : DDR4 SDRAM
Memory Size : 1024MB
Flash Size : 128MB
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main image files...
Loading file flash:/wa6300-system.bin.......................................
..Done.
Loading file flash:/wa6300-boot.bin.........Done.
Image file flash:/wa6300-boot.bin is self-decompressing.....Done.
System image is starting...
//设备启动完成
Startup configuration file doesn"t exist or is invalid.
Performing automatic configuration... Press CTRL_C or CTRL_D to break.
Automatic configuration attempt: 1.
Not ready for automatic configuration: no interface available.
Waiting for the next...
Automatic configuration is aborted.
Line con0 is available.
Press ENTER to get started.
云AP是Fat AP。初次使用云AP，给云AP上电后，云AP会默认开启4个无线服务：
其中一个称之为管理WIFI，也称内部WIFI，SSID为H3C_XXXXXX，XXXXXX为设备mac地址后六位。管理WIFI供商铺内部员工管理使用，一般在2.4G频段工作，当设备未连接到绿洲时，通过连接管理WIFI在浏览器输入10.40.94.1或myap.h3c.com访问本地web页面可进行本设备下的无线服务管理配置，一旦连接上绿洲，将只能通过绿洲平台进行统一的无线服务配置管理。
其余3个称为用户WIFI，也称商业WIFI，SSID为H3C_WiFi_1、H3C_WiFi_2、H3C_WiFi_3，不加密，不认证，不隐藏。当设备连接到外网，可为已经连接上用户WIFI的用户提供上网服务。
# 当出现如下提示信息时，键入
Resetting the APs will terminate the CAPWAP tunnels with the AC. Continue? [Y/N]:
1.1 现场无AC，且当前AP版本在2442以下
查看AP版本的命令是dis version，如下：
H3C Comware Software, Version 7.1.064, Release 2448P10 //2448P10即为当前AP版本
Copyright (c) 2004-2021 New H3C Technologies Co., Ltd. All rights reserved.
H3C WA6320 uptime is 0 weeks, 0 days, 0 hours, 0 minutes
Last reboot reason : User soft reboot
1.1.1 需要通过bootrom方式切换AP模式，配置案例如下
操作风险提示：AP瘦切胖有风险，操作不当或者意外断电会导致设备故障，操作需谨慎。命令行升级需在PC上搭建TFTP Server（推荐用户使用3CDaemon搭建TFTP服务器）
将软件版本下载到设备FLASH内，然后通过命令行加载Bootrom版本，再加载主机软件版本，加载时输入的文件名一定要一致，建议复制黏贴，然后升级过程中避免断电重启操作。
1、先从官网下载WA6300的胖版本
https://www.h3c.com/cn/d_202110/1479660_30005_40.htm
下载版本的账号是：yx800 密码：01230123 官网选这个登录账号
下载压缩包WA6300-CMW710-R2448P10.zip，解压生成ipe文件，放到电脑桌面上，并且把文件名修改为WA6300.ipe。
2、电脑通过网线连接到ap的一个网口，电脑网卡设置为：192.168.0.1 255.255.255.0，如下例子打开TFTP服务器，把ipe软件版本放到电脑桌面上，TFTP服务器目录指向电脑桌面，然后点击确定。
3、console口操作，console口登录方法参考《1.03 设备管理-Console登录方法》
在AP重启的时候按住不停地按Ctrl+B进入设备的bootroom菜单，以下标黑部分为设备自动打印部分。
==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
===================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 3 //进入以太口子菜单
==========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|
===================================================================
Enter your choice(0-5): 5 //修改以太口参数
==========================
|Note: "." = Clear field. |
| "-" = Go to previous field. |
| Ctrl+D = Quit. |
===================================================================
Protocol (FTP or TFTP) :ftp TFTP
//忽略输出内容，直接输入TFTP，然后回车
Load File Name : wa6300.ipe
//忽略输出内容，直接输入wa6300.ipe，然后回车
wa6300.ipe是胖版本文件名称
Target File Name : wa6300.ipe
//忽略输出内容，直接输入wa6300.ipe，然后回车
wa6300.ipe是胖版本文件名称
Server IP Address :192.168.0.1
//忽略输出内容，直接输入电脑主机的 IP，比如192.168.0.1，然后回车
Local IP Address :192.168.0.50
//忽略输出内容，直接输入和电脑主机的ip同一网段，比如192.168.0.50，然后回车
Gateway IP Address :0.0.0.0
//忽略输出内容，直接回车
备注：注意给电脑手动配置一个与AP同网段的IP地址，保证电脑与AP路由可达
==========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|
===================================================================
Enter your choice(0-5): 2 //输入2，更新版本
Loading.................................................................................................................................................
........................................................................................................................................................
........................Done.
46682112 bytes downloaded! //上传成功
The file is exist,will you overwrite it? [Y/N]Y
Image file wa6300-system.bin is self-decompressing...
Saving file flash:/wa6300-system.bin .......................................
............................................................................
....................Done.
Image file wa6300-boot.bin is self-decompressing...
Saving file flash:/wa6300-boot.bin ........................Done.
==========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|
===================================================================
Enter your choice(0-5): 0 //输入0，返回到主菜单
==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
===================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 1 //输入1，引导系统并重启AP
Loading the main image files...
Loading file flash:/wa6300-system.bin.......................................
...Done.
Loading file flash:/wa6300-boot.bin.........Done.
Extended BootWare Version is not equal,updating? [Y/N]
Updating Extended BootWare...Done.
Basic BootWare Version is not equal,updating? [Y/N]
Updating Basic BootWare.....Done.
BootWare updated,System is rebooting now.
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing....Done.
****************************************************************************
* *
* H3C WA6338-LI BootWare, Version 7.17 *
* *
****************************************************************************
Copyright (c) 2004-2021 New H3C Technologies Co., Ltd.
Compiled Date : Aug 31 2021
Memory Type : DDR4 SDRAM
Memory Size : 1024MB
Flash Size : 128MB
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main image files...
Loading file flash:/wa6300-system.bin.......................................
..Done.
Loading file flash:/wa6300-boot.bin.........Done.
Image file flash:/wa6300-boot.bin is self-decompressing.....Done.
System image is starting...
Startup configuration file doesn"t exist or is invalid.
Line con0 is available.
Press ENTER to get started. //重启完成
此时设备已经升级到2442以上的版本，需要再次重启设备，并在在AP重启的时候按住不停地按Ctrl+B进入设备的bootroom菜单，切换云模式。
==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): //按键Ctrl+Y，设置ap模式
Please select the new mode
Current mode is Fit Mode
============================================================================
|NO. Mode |
|1 Fit Mode |
|2 Anchor-AC (Virtual AC Mode) |
|3 Cloud Mode |
|0 Exit |
============================================================================
Enter your choice(0-3):3 //输入3，即cloud模式，即胖模式
Changed to cloud mode successfully! //切换成功
==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 0 //输入0，重启AP
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing....Done.
****************************************************************************
* *
* H3C WA6338-LI BootWare, Version 7.17 *
* *
****************************************************************************
Copyright (c) 2004-2021 New H3C Technologies Co., Ltd.
Compiled Date : Aug 31 2021
Memory Type : DDR4 SDRAM
Memory Size : 1024MB
Flash Size : 128MB
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main image files...
Loading file flash:/wa6300-system.bin.......................................
..Done.
Loading file flash:/wa6300-boot.bin.........Done.
Image file flash:/wa6300-boot.bin is self-decompressing.....Done.
System image is starting...
//设备启动完成
Startup configuration file doesn"t exist or is invalid.
Performing automatic configuration... Press CTRL_C or CTRL_D to break.
Automatic configuration attempt: 1.
Not ready for automatic configuration: no interface available.
Waiting for the next...
Automatic configuration is aborted.
Line con0 is available.
Press ENTER to get started.
云AP是Fat AP。初次使用云AP，给云AP上电后，云AP会默认开启4个无线服务：
其中一个称之为管理WIFI，也称内部WIFI，SSID为H3C_XXXXXX，XXXXXX为设备mac地址后六位。管理WIFI供商铺内部员工管理使用，一般在2.4G频段工作，当设备未连接到绿洲时，通过连接管理WIFI在浏览器输入10.40.94.1或myap.h3c.com访问本地web页面可进行本设备下的无线服务管理配置，一旦连接上绿洲，将只能通过绿洲平台进行统一的无线服务配置管理。
其余3个称为用户WIFI，也称商业WIFI，SSID为H3C_WiFi_1、H3C_WiFi_2、H3C_WiFi_3，不加密，不认证，不隐藏。当设备连接到外网，可为已经连接上用户WIFI的用户提供上网服务。
配置关键点
无
该案例暂时没有网友评论
编辑评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证，请认证邮箱或绑定手机后进行当前操作