用户现场两台S7506E做IRF,每个机框配有一块LSU1WCME0无线插卡,需要将插卡的版本由V5升级到V7。
对第一块LSU1WCME0升级操作后,版本加载失败,交换机上状态也显示fault。
[H3C]dis version
H3C Comware Software, Version 7.1.070, Release 7536P05
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd. All rights reserved.
H3C S7506E uptime is 0 weeks, 1 day, 21 hours, 16 minutes
Last reboot reason : USER reboot
[H3C]dis dev
Slot Type State Subslot Soft Ver Patch Ver
1/0 LSQM2MPUC0 Master 0 S7500E-7536P05 None
1/1 LSQM2MPUC0 Standby 0 S7500E-7536P05 None
1/2 LSQM1TGS48RSG0 Normal 0 S7500E-7536P05 None
1/3 LSQM2GP48SA0 Normal 0 S7500E-7536P05 None
1/4 LSQM2GT48SA0 Normal 0 S7500E-7536P05 None
1/5 NONE Fault 0 NONE None
1/6 LSUM1FWCEAB0 Normal 0 S7500E-7536P05 None
1/7 NONE Absent 0 NONE None
2/0 LSQM2MPUC0 Standby 0 S7500E-7536P05 None
2/1 LSQM2MPUC0 Standby 0 S7500E-7536P05 None
2/2 LSQM1TGS48RSG0 Normal 0 S7500E-7536P05 None
2/3 LSQM2GP48SA0 Normal 0 S7500E-7536P05 None
2/4 LSQM2GT48SA0 Normal 0 S7500E-7536P05 None
2/5 LSU1WCME0 Normal 0 S7500E-7536P05 None
2/6 LSUM1FWCEAB0 Normal 0 S7500E-7536P05 None
2/7 NONE Absent 0 NONE None
1、参照控制器V5升级V7指导书,先使用“boot5.01.bin”文件将LSU1WCME0插卡的Bootrom升级到5.01版本,此步骤成功。
****************************************************************************
* *
* H3C LSUM1WCME0 BootWare, Version 5.01 *
* *
****************************************************************************
2、升级软件版本,但是一直加载失败,使用R5121P32和R5208P03测试一样,过程如下。
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Enter your choice(0-9): 3
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is cfa0 |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-5): 5
==========================<ETHERNET PARAMETER SET>==========================
|Note: &#39;.&#39; = Clear field. |
| &#39;-&#39; = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :boot.bin
:WCMX40-CMW710-R5208P03.ipe
Target File Name :boot.bin
:WCMX40-CMW710-R5208P03.ipe
Server IP Address :1.1.1.2
Local IP Address :1.1.1.1
Subnet Mask :0.0.0.0
Gateway IP Address :0.0.0.0
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is cfa0 |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-5): 1
Loading.....................................................................
............................................................................
............................................................................
..............................................Done.
441801728 bytes downloaded!
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Press Ctrl+T to start heavy memory test
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing......Done.
****************************************************************************
* *
* H3C LSUM1WCME0 BootWare, Version 5.01 *
* *
****************************************************************************
Compiled Date : Oct 14 2015
CPU Type : XLP432
CPU Clock Speed : 1400MHz
Memory Type : DDR3 SDRAM
Memory Size : 8192MB
Memory Speed : 1333MHz
BootWare Size : 768KB
Flash Size : 16MB
cfa0 Size : 4002MB
CPLD1 Version : 001
CPLD2 Version : 003
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU.........Done.
Locating file flash:/S7500E-CMW710-SYSTEM-R7536P05.bin...Done.
Loading...Done.
Loading file flash:/S7500E-CMW710-SYSTEM-R7536P05.bin...Done!
Locating file flash:/S7500E-CMW710-BOOT-R7536P05.bin...Done.
Loading...Done.
Loading file flash:/S7500E-CMW710-BOOT-R7536P05.bin.........................
.....Done.Done!
Loading the main image files...
The image does not exist!
Loading the backup image files...
The image does not exist!
Loading images fails.
Loading the main boot and system image files...
The image does not exist!
Loading the backup boot and system image files...
The image does not exist!
Loading images fails.
Loading the main boot image...
The image does not exist!
Loading the backup boot image...
The image does not exist!
Loading boot image fails.
Password recovery capability is enabled.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Enter your choice(0-9): 3
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is cfa0 |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-5): 2
Loading.....................................................................
............................................................................
..............................................Done.
441801728 bytes downloaded!
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Press Ctrl+T to start heavy memory test
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing......Done.
****************************************************************************
* *
* H3C LSUM1WCME0 BootWare, Version 5.01 *
* *
****************************************************************************
Compiled Date : Oct 14 2015
CPU Type : XLP432
CPU Clock Speed : 1400MHz
Memory Type : DDR3 SDRAM
Memory Size : 8192MB
Memory Speed : 1333MHz
BootWare Size : 768KB
Flash Size : 16MB
cfa0 Size : 4002MB
CPLD1 Version : 001
CPLD2 Version : 003
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU.........Done.
Locating file flash:/S7500E-CMW710-SYSTEM-R7536P05.bin...Done.
Loading...Done.
Loading file flash:/S7500E-CMW710-SYSTEM-R7536P05.bin...Done!
Locating file flash:/S7500E-CMW710-BOOT-R7536P05.bin...Done.
Loading...Done.
Loading file flash:/S7500E-CMW710-BOOT-R7536P05.bin.........................
.....Done.Done!
Loading the main image files...
The image does not exist!
Loading the backup image files...
The image does not exist!
Loading images fails.
Loading the main boot and system image files...
The image does not exist!
Loading the backup boot and system image files...
The image does not exist!
Loading images fails.
Loading the main boot image...
The image does not exist!
Loading the backup boot image...
The image does not exist!
Loading boot image fails.
Password recovery capability is enabled.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
原因是“boot5.01.bin”这个Bootrom版本较老,无法正常引导R5208P03启动。使用“acwcme30603_v5.08.btw”将Bootrom版本更新到5.08问题解决,升级过程如下。
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): 7
=========================<BootWare Operation Menu>==========================
|Note:the operating device is cfa0 |
|<1> Backup Full BootWare |
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |
|<4> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 4
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 4
==========================<ETHERNET PARAMETER SET>==========================
|Note: &#39;.&#39; = Clear field. |
| &#39;-&#39; = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :host
:acwcme30603_v5.08.btw
Target File Name :target
:acwcme30603_v5.08.btw
Server IP Address :192.168.1.1 1.1.1.2
Local IP Address :192.168.1.253 1.1.1.1
Gateway IP Address :0.0.0.0
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 1
Loading..........Done!
402432 bytes downloaded!
Updating Basic BootWare? [Y/N]Y
Updating Basic BootWare.........Done!
Updating Extend BootWare? [Y/N]Y
Updating Extend BootWare.........Done!
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 0
=========================<BootWare Operation Menu>==========================
|Note:the operating device is cfa0 |
|<1> Backup Full BootWare |
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |
|<4> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 0
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): 0
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Press Ctrl+T to start heavy memory test
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing......Done.
NOTICE:Now the device has been updated to ComwareV7
****************************************************************************
* *
* H3C LSUM1WCME0 BootWare, Version 5.08 *
* *
****************************************************************************
Compiled Date : Jul 20 2017
CPU Type : XLP432
CPU Clock Speed : 1400MHz
Memory Type : DDR3 SDRAM
Memory Size : 8192MB
Memory Speed : 1333MHz
BootWare Size : 768KB
Flash Size : 16MB
cfa0 Size : 4002MB
CPLD1 Version : 001
CPLD2 Version : 003
PCB Version : Ver.A
BootWare Validating...
Normal Basic BootWare Version is newer than Backup Basic BootWare!
Begin to Update the Backup Basic BootWare.........Done.
Normal Extended BootWare Version is newer than Backup Extended BootWare!
Begin to Update the Backup Extended BootWare.........Done.
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Password recovery capability is enabled.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Enter your choice(0-9): 3
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is cfa0 |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-5): 5
==========================<ETHERNET PARAMETER SET>==========================
|Note: &#39;.&#39; = Clear field. |
| &#39;-&#39; = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :WCME0-CMW520-R2609P58.bin
:WCMX40-CMW710-R5208P03.ipe
Target File Name :WCME0-CMW520-R2609P58.bin
:WCMX40-CMW710-R5208P03.ipe
Server IP Address :1.1.1.2
Local IP Address :1.1.1.1
Subnet Mask :0.0.0.0
Gateway IP Address :0.0.0.0
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is cfa0 |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-5): 2
Loading.....................................................................
............................................................................
..............................................Done.
441801728 bytes downloaded!
Image file boot.bin is self-decompressing...
Saving file cfa0:/boot.bin .................................................
.......Done.
Image file system.bin is self-decompressing...
Saving file cfa0:/system.bin ..........Done.
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is cfa0 |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-5): 0
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Enter your choice(0-9): 4
===============================<File CONTROL>===============================
|Note:the operating device is cfa0 |
|<1> Display All File(s) |
|<2> Set Image File type |
|<3> Set Bin File type |
|<4> Set Configuration File type |
|<5> Delete File |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-5): 1
Display all file(s) in cfa0:
&#39;M&#39; = MAIN &#39;B&#39; = BACKUP &#39;N/A&#39; = NOT ASSIGNED
============================================================================
|NO. Size(B) Time Type Name |
|1 376662016 Jul/20/2017 16:06:20 M cfa0:/boot.bin |
|2 65132544 Jul/20/2017 16:10:06 M cfa0:/system.bin |
============================================================================
===============================<File CONTROL>===============================
|Note:the operating device is cfa0 |
|<1> Display All File(s) |
|<2> Set Image File type |
|<3> Set Bin File type |
|<4> Set Configuration File type |
|<5> Delete File |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-5): 0
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Enter your choice(0-9): 1......Done.
Locating file flash:/S7500E-CMW710-SYSTEM-R7536P05.bin...Done.
Loading...Done.
Loading file flash:/S7500E-CMW710-SYSTEM-R7536P05.bin...Done!
Locating file flash:/S7500E-CMW710-BOOT-R7536P05.bin...Done.
Loading...Done.
Loading file flash:/S7500E-CMW710-BOOT-R7536P05.bin.........................
.....Done.Done!
Loading the main image files...
Loading file cfa0:/system.bin...............................................
..................Done.
Loading file cfa0:/boot.bin.................................................
............................................................................
............................................................................
............................................................................
............................................................................
..........Done.
Extended BootWare Version is not equal,updating? [Y/N]
Updating Extended BootWare.........Done.
BootWare updated,System is rebooting now.
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Press Ctrl+T to start heavy memory test
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing......Done.
****************************************************************************
* *
* H3C LSUM1WCME0 BootWare, Version 5.07 *
* *
****************************************************************************
Compiled Date : Apr 14 2017
CPU Type : XLP432
CPU Clock Speed : 1400MHz
Memory Type : DDR3 SDRAM
Memory Size : 8192MB
Memory Speed : 1333MHz
BootWare Size : 768KB
Flash Size : 16MB
cfa0 Size : 4002MB
CPLD1 Version : 001
CPLD2 Version : 003
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU.........Done.
Locating file flash:/S7500E-CMW710-SYSTEM-R7536P05.bin...Done.
Loading...Done.
Loading file flash:/S7500E-CMW710-SYSTEM-R7536P05.bin...Done!
Locating file flash:/S7500E-CMW710-BOOT-R7536P05.bin...Done.
Loading...Done.
Loading file flash:/S7500E-CMW710-BOOT-R7536P05.bin.........................
.....Done.Done!
Loading the main image files...
Loading file cfa0:/system.bin...............................................
..................Done.
Loading file cfa0:/boot.bin.................................................
............................................................................
............................................................................
............................................................................
............................................................................
.........Done.
Image file cfa0:/boot.bin is self-decompressing.............................
.............................Done.
System image is starting...
[ 0.000000] 0:Malformed early option &#39;pdt_wcmx_support&#39;
Cryptographic Algorithms Known-Answer Tests are running ...
CPU 0 of slot 1:
Starting Known-Answer tests in the user space.
Known-answer test for SHA1 passed.
Known-answer test for SHA224 passed.
Known-answer test for SHA256 passed.
Known-answer test for SHA384 passed.
Known-answer test for SHA512 passed.
Known-answer test for HMAC-SHA1 passed.
Known-answer test for HMAC-SHA224 passed.
Known-answer test for HMAC-SHA256 passed.
Known-answer test for HMAC-SHA384 passed.
Known-answer test for HMAC-SHA512 passed.
Known-answer test for AES passed.
Known-answer test for RSA(signature/verification) passed.
Known-answer test for RSA(encrypt/decrypt) passed.
Known-answer test for DSA(signature/verification) passed.
Known-answer test for random number generator passed.
Known-Answer tests in the user space passed.
Starting Known-Answer tests in the kernel.
Known-answer test for AES passed.
Known-answer test for HMAC-SHA1 passed.
Known-answer test for SHA1 passed.
Known-answer test for GCM passed.
Known-answer test for GMAC passed.
Known-answer test for random number generator passed.
Known-Answer tests in the kernel passed.
Cryptographic Algorithms Known-Answer Tests passed.
Startup configuration file does not exist.
Performing automatic configuration... Press CTRL_C or CTRL_D to break.
Automatic configuration attempt: 1.
Not ready for automatic configuration: no interface available.
Waiting for the next...
Automatic configuration is running, press CTRL_C or CTRL_D to break.
Automatic configuration is running, press CTRL_C or CTRL_D to break.
Automatic configuration is running, press CTRL_C or CTRL_D to break.
Automatic configuration is aborted.
Line con0 is available.
Press ENTER to get started.
<H3C>
<H3C>%Jul 20 16:28:16:582 2017 H3C SHELL/5/SHELL_LOGIN: Console logged in from con0.
<H3C>sys
System View: return to User View with Ctrl+Z.
[H3C]dis version
H3C Comware Software, Version 7.1.064, Release 5208P03
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd. All rights reserved.
H3C LSU1WCME0 uptime is 0 weeks, 0 days, 0 hours, 8 minutes
Last reboot reason : Power on
Boot image: cfa0:/boot.bin
Boot image version: 7.1.064, Release 5208P03
Compiled Jun 07 2017 16:00:00
System image: cfa0:/system.bin
System image version: 7.1.064, Release 5208P03
Compiled Jun 07 2017 16:00:00
Slot 1
Uptime is 0 week, 0 day, 0 hour, 8 minutes
with 1 RMI XLP 432 1400MHz Processor
6912M bytes DDR3
16M bytes NorFlash Memory
4002M bytes CFCard Memory
Hardware Version is Ver.A
FPGA1 Hardware Version is Ver.a
FPGA2 Hardware Version is Ver.a
CPLD 1 Version is 001
CPLD 2 Version is 003
FPGA1 Logic Version is 519
FPGA2 Logic Version is 519
Basic Bootrom Version is 5.06
Extend Bootrom Version is 5.07
[Subslot 0]LSU1WCME0 Hardware Version is Ver.A
[H3C]
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作