如何实现rbm联动track场景下,聚合成员口一半down了才主备切换
无
无
F1090_1的1/0/2 1/0/3 1/0/4 1/0/5为RAGG10的成员口,F1090_2的1/0/2我RAGG10的成员口
interface Route-Aggregation10
ip address 10.9.9.9 255.255.255.0
link-aggregation selected-port minimum 3 ///设置最小选择数为3
track 1 interface Route-Aggregation10
remote-backup group
data-channel interface GigabitEthernet1/0/10
track 1
local-ip 1.1.1.1
remote-ip 1.1.1.2
device-role primary
RBM_P<H3C>display remote-backup-group status
Remote backup group information:
Backup mode: Active/standby
Device management role: Primary
Device running status: Active
Data channel interface: GigabitEthernet1/0/10
Local IP: 1.1.1.1
Remote IP: 1.1.1.2 Destination port: 60064
Control channel status: Connected
Keepalive interval: 1s
Keepalive count: 10
Configuration consistency check interval: 24 hour
Configuration consistency check result: Not Performed
Configuration backup status: Auto sync enabled
Session backup status: Hot backup enabled
Delay-time: 0 min
Uptime since last switchover: 0 days, 0 hours, 3 minutes
Switchover records:
Time Status change Cause
2022-04-16 22:48:12 Active to Active Keepalive link established
2022-04-16 22:48:00 Initial to Active Local device rebooted
2022-04-15 13:36:02 Active to Standby Track entries changed
2022-04-15 13:27:01 Active to Active Keepalive link established
2022-04-15 13:25:19 Initial to Active HA Configuration changed
RBM_P<H3C>display link-aggregation verbose Route-Aggregation 10
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected, I -- Individual
Port: A -- Auto port
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregate Interface: Route-Aggregation10
Aggregation Mode: Static
Loadsharing Type: Shar
Port Status Priority Oper-Key
--------------------------------------------------------------------------------
GE1/0/2 S 32768 1
GE1/0/3 S 32768 1
GE1/0/4 S 32768 1
GE1/0/5 S 32768 1
RBM_P[H3C-GigabitEthernet1/0/2]shutdown
RBM_P[H3C-GigabitEthernet1/0/2]%Apr 16 22:54:02:657 2022 H3C IFNET/3/PHY_UPDOWN: -COntext=1; Physical state on the interface GigabitEthernet1/0/2 changed to down.
%Apr 16 22:54:02:657 2022 H3C IFNET/5/LINK_UPDOWN: -COntext=1; Line protocol state on the interface GigabitEthernet1/0/2 changed to down.
%Apr 16 22:54:02:657 2022 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: -COntext=1; Member port GE1/0/2 of aggregation group RAGG10 changed to the inactive state, because the physical state of the port is down.
RBM_P[H3C-GigabitEthernet1/0/4]shutdown
%Apr 16 22:54:17:586 2022 H3C IFNET/3/PHY_UPDOWN: -COntext=1; Physical state on the interface GigabitEthernet1/0/4 changed to down.
%Apr 16 22:54:17:586 2022 H3C IFNET/5/LINK_UPDOWN: -COntext=1; Line protocol state on the interface GigabitEthernet1/0/4 changed to down.
%Apr 16 22:54:17:586 2022 H3C LAGG/6/LAGG_INACTIVE_LOWER_LIMIT: -COntext=1; Member port GE1/0/3 of aggregation group RAGG10 changed to the inactive state, because the number of active ports is below the lower limit.
%Apr 16 22:54:17:586 2022 H3C LAGG/6/LAGG_INACTIVE_PHYSTATE: -COntext=1; Member port GE1/0/4 of aggregation group RAGG10 changed to the inactive state, because the physical state of the port is down.
%Apr 16 22:54:17:586 2022 H3C LAGG/6/LAGG_INACTIVE_LOWER_LIMIT: -COntext=1; Member port GE1/0/5 of aggregation group RAGG10 changed to the inactive state, because the number of active ports is below the lower limit.
%Apr 16 22:54:17:587 2022 H3C IFNET/5/LINK_UPDOWN: -COntext=1; Line protocol state on the interface GigabitEthernet1/0/3 changed to down.
%Apr 16 22:54:17:587 2022 H3C IFNET/5/LINK_UPDOWN: -COntext=1; Line protocol state on the interface GigabitEthernet1/0/5 changed to down.
%Apr 16 22:54:17:587 2022 H3C IFNET/3/PHY_UPDOWN: -COntext=1; Physical state on the interface Route-Aggregation10 changed to down.
%Apr 16 22:54:17:587 2022 H3C IFNET/5/LINK_UPDOWN: -COntext=1; Line protocol state on the interface Route-Aggregation10 changed to down.
RBM_P[H3C]dis remote-backup-group status
Remote backup group information:
Backup mode: Active/standby
Device management role: Primary
Device running status: Standby
Data channel interface: GigabitEthernet1/0/10
Local IP: 1.1.1.1
Remote IP: 1.1.1.2 Destination port: 60064
Control channel status: Connected
Keepalive interval: 1s
Keepalive count: 10
Configuration consistency check interval: 24 hour
Configuration consistency check result: Not Performed
Configuration backup status: Auto sync enabled
Session backup status: Hot backup enabled
Delay-time: 0 min
Uptime since last switchover: 0 days, 0 hours, 0 minutes
Switchover records:
Time Status change Cause
2022-04-16 22:54:17 Active to Standby Track entries changed
2022-04-16 22:48:12 Active to Active Keepalive link established
2022-04-16 22:48:00 Initial to Active Local device rebooted
2022-04-15 13:36:02 Active to Standby Track entries changed
2022-04-15 13:27:01 Active to Active Keepalive link established
2022-04-15 13:25:19 Initial to Active HA Configuration changed
RBM_P[H3C]dis link-aggregation verbose Route-Aggregation 10
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected, I -- Individual
Port: A -- Auto port
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregate Interface: Route-Aggregation10
Aggregation Mode: Static
Loadsharing Type: Shar
Port Status Priority Oper-Key
--------------------------------------------------------------------------------
GE1/0/2 U 32768 1
GE1/0/3 U 32768 1
GE1/0/4 U 32768 1
GE1/0/5 U 32768 1
聚合口下设置最小选中数
interface Route-Aggregation10
ip address 10.9.9.9 255.255.255.0
link-aggregation selected-port minimum 3 ///设置最小选择数为3
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作