问题现象:配置mesh,移动链路切换配置,同一vlan ping测试不通;配置完成后,在FAT AP上能看到WLAN mesh链路,但是尝试使用VLAN30 ping测不通(30.1.1.2 ping 30.1.1.1 不通)
1、vlan30都有放通
胖ap:
interface WLAN-Mesh1
port link-type trunk
undo port trunk permit vlan 1
port trunk permit vlan 30 40
瘦ap:
AP name IP address State Time
f4e9-7527-dde0 172.16.1.3 Run 01-05 11:21:48
f4e9-7527-bb00 172.16.1.4 Run 01-05 11:19:50
(1)wlan ap f4e9-7527-bb00 model WA6628X
serial-id 219801A2ER822AE000L1
map-configuration flash:/map.txt
vlan 1
vlan 30
vlan 40
interface wlan-mesh 1
mesh-port link-type trunk
undo mesh-port trunk permit vlan 1
mesh-port trunk permit vlan 30 40
GigabitEthernet1/0/1
Current state: UP
Line protocol state: UP
IP packet frame type: Ethernet II, hardware address: f4e9-7527-bb00
Description: GigabitEthernet1/0/1 Interface
Bandwidth: 1000000 kbps
Loopback is not set
Media type is twisted pair, promiscuous mode not set
1000Mbps-speed mode, full-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
Flow-control is not enabled
Maximum frame length: 1600
Allow jumbo frames to pass
Broadcast max-ratio: 100%
Multicast max-ratio: 100%
Unicast max-ratio: 100%
PVID: 1
Port link-type: Trunk
VLAN Passing: 1(default vlan), 30, 40
VLAN permitted: 1(default vlan), 30, 40
(2)wlan ap f4e9-7527-dde0 model WA6628X
serial-id 219801A2ER822AE000W1
map-configuration flash:/map.txt
vlan 1
vlan 30
vlan 40
interface wlan-mesh 1
mesh-port link-type trunk
undo mesh-port trunk permit vlan 1
mesh-port trunk permit vlan 30 40
GigabitEthernet1/0/1
Current state: UP
Line protocol state: UP
IP packet frame type: Ethernet II, hardware address: f4e9-7527-dde0
Description: GigabitEthernet1/0/1 Interface
Bandwidth: 1000000 kbps
Loopback is not set
Media type is twisted pair, promiscuous mode not set
1000Mbps-speed mode, full-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
Flow-control is not enabled
Maximum frame length: 1600
Allow jumbo frames to pass
Broadcast max-ratio: 100%
Multicast max-ratio: 100%
Unicast max-ratio: 100%
PVID: 1
Port link-type: Trunk
VLAN Passing: 1(default vlan), 30, 40
VLAN permitted: 1(default vlan), 30, 40
2、 瘦ap上也能学习到mac地址
wlan ap f4e9-7527-bb00
===============display mac-address===============
MAC Address VLAN ID State Port/Nickname Aging
081d-fb07-116a 1 Learned GE1/0/1 Y
bcd0-ebe1-ebd0 1 Learned GE1/0/1 Y
fc45-9690-3828 1 Learned GE1/0/1 Y
38a9-1c3b-0331 30 MESH WLAN-MeshLink9 N
38a9-1c3b-0dd1 30 MESH WLAN-MeshLink6 N
wlan ap f4e9-7527-dde0
===============display mac-address===============
MAC Address VLAN ID State Port/Nickname Aging
081d-fb07-116a 1 Learned GE1/0/1 Y
bcd0-ebe1-ebd0 1 Learned GE1/0/1 Y
f4e9-7527-bb00 1 Learned GE1/0/1 Y
fc45-9690-3828 1 Learned GE1/0/1 Y
38a9-1c3b-0331 30 Learned GE1/0/1 Y
38a9-1c3b-0dd1 30 Learned GE1/0/1 Y
3、 在瘦AP上起一个VLAN30,能够ping通交换机的vlan30地址
删除AP视图下的vlan 30,因为在AP视图下配置vlan,
会把标签剥掉,导致FAT AP无法从vlan 30学到arp,而是从vlan 1学到。
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作