MSR路由做了IRF2堆叠之后,配置本地端口镜像,发现目的端口无法配置,报错提示如下:
[H3C]mirroring-group 1 monitor-port gi 1/2/6/3
The type of the monitor port in the mirroring group is not supported.
本地端口镜像配置正常,但是目的端口无法配置
[H3C]dis mirroring-group all
Mirroring group 1:
Type: Local
Status: Incomplete
Mirroring port:
GigabitEthernet1/2/6/5 Both
GigabitEthernet1/2/6/6 Both
GigabitEthernet1/2/6/7 Both
GigabitEthernet2/2/6/5 Both
GigabitEthernet2/2/6/6 Both
GigabitEthernet2/2/6/7 Both
本地端口镜像不支持源端口和目的端口是处于不同框的情况。
举例说明:配置本地端口镜像后,只能将Slot1机框上的源端口镜像到Slot1机框上的目的端口,不能将Slot2机框上的源端口镜像到Slot1机框上的目的端口。
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作