某局点 FS5100 POE告警

不涉及

%Jan 10 12:32:08:708 2013 FS5100_2 POE/1/PSE_POWER_USAGE_BELOW_THRESHOLD: Trap <pethMainPowerUsageOffNotification>: PSE 4, has sampled consumption 97W.

%Jan 10 12:32:28:379 2013 FS5100_2 POE/1/PSE_POWER_USAGE_OVER_THRESHOLD: Trap <pethMainPowerUsageOnNotification>: PSE 4, has sampled consumption 105W.

%Jan 10 12:32:41:677 2013 FS5100_2 POE/1/PSE_POWER_USAGE_BELOW_THRESHOLD: Trap <pethMainPowerUsageOffNotification>: PSE 4, has sampled consumption 95W.

%Jan 10 12:33:14:744 2013 FS5100_2 POE/1/PSE_POWER_USAGE_OVER_THRESHOLD: Trap <pethMainPowerUsageOnNotification>: PSE 4, has sampled consumption 100W.

%Jan 10 12:33:21:450 2013 FS5100_2 POE/1/PSE_POWER_USAGE_BELOW_THRESHOLD: Trap <pethMainPowerUsageOffNotification>: PSE 4, has sampled consumption 97W.

设备频繁打印如下告警，看着是功耗超阈值了（接了10个ap，对端ap是高密，9-25w功率），这个阈值是咋看的，这个告警是否需要处理？另外现网有ap偶发重启，比如接在12口下的ap，帮忙看下是否我们供电问题？

%Jan 10 12:33:14:744 2013 FS5100_2 POE/1/PSE_POWER_USAGE_OVER_THRESHOLD: Trap <pethMainPowerUsageOnNotification>: PSE 4, has sampled consumption 100W.

%Jan 10 12:33:21:450 2013 FS5100_2 POE/1/PSE_POWER_USAGE_BELOW_THRESHOLD: Trap <pethMainPowerUsageOffNotification>: PSE 4, has sampled consumption 97W.

  1.从display poe pse看设备最大可以提供的功率是125W，告警阈值是80%即100W，看peak已经达到122w了，现场ap高密，功率根据用户数量浮动，最大一个ap到25w，接10个ap可能会出现超功率的情况，现场反馈拔掉一个确实会稳定一些，所以分析是ap使用超规格导致的告警

===============display poe pse=============== 

 PSE ID                           : 4

Slot No.                         : 1

SSlot No.                        : 0

PSE Model                        : LSPPSE16B

PSE Status                       : Enabled

PSE Fast Power Supply            : Disabled

Power Priority                   : Low

Current Power                    : 86.7     W

Average Power                    : 87.3     W

Peak Power                       : 122.2    W

Max Power                        : 125.0    W

Max Allocable Power              : 125.0    W

Remaining Guaranteed Power       : 125.0    W

PSE CPLD Version                 : -  

 PSE Software Version             : 510

 PSE Hardware Version             : 57855

PSE Legacy PD Detection          : Disabled

Power Utilization Threshold      : 80 

PD Power Policy                  : Disabled

PD Disconnect-Detection Mode     : AC

PD High Inrush                   : Disabled

ap使用超规格，建议在规格内使用