S7610E-X LIPC日志报错

%@7930%Oct 26 22:53:16:457 2023 SDYT-SC2-CDN-2-SNS-SW10-H3CS7610E LIPC/4/LIPC_STCP_CHECK: Data stays in the receive buffer for an over long time. Owner=comsh, VRF=0, local address/port=2128/25537, remote address/port=4168/14610.

%@7931%Oct 26 22:53:16:457 2023 SDYT-SC2-CDN-2-SNS-SW10-H3CS7610E LIPC/4/LIPC_STCP_CHECK: Data stays in the receive buffer for an over long time. Owner=comsh, VRF=0, local address/port=2128/25536, remote address/port=4168/14610.

%@7932%Oct 26 22:53:16:457 2023 SDYT-SC2-CDN-2-SNS-SW10-H3CS7610E LIPC/4/LIPC_STCP_CHECK: Data stays in the receive buffer for an over long time. Owner=comsh, VRF=0, local address/port=2128/25535, remote address/port=4160/14610.

%@7933%Oct 26 22:53:16:457 2023 SDYT-SC2-CDN-2-SNS-SW10-H3CS7610E LIPC/4/LIPC_STCP_CHECK: Data stays in the receive buffer for an over long time. Owner=comsh, VRF=0, local address/port=2128/25534, remote address/port=4160/14610.

%@7934%Oct 26 22:53:16:457 2023 SDYT-SC2-CDN-2-SNS-SW10-H3CS7610E LIPC/4/LIPC_STCP_CHECK: Data stays in the receive buffer for an over long time. Owner=comsh, VRF=0, local address/port=2128/25533, remote address/port=4144/14610.

%@7935%Oct 26 22:53:16:457 2023 SDYT-SC2-CDN-2-SNS-SW10-H3CS7610E LIPC/4/LIPC_STCP_CHECK: Data stays in the receive buffer for an over long time. Owner=comsh, VRF=0, local address/port=2128/25532, remote address/port=4144/14610.

Data stays in the receive buffer for an over long time. Owner=comsh, VRF=0, local address/port=2128/25519, remote address/port=2120/14610.

%@7942%Oct 26 22:53:16:457 2023 SDYT-SC2-CDN-2-SNS-SW10-H3CS7610E LIPC/4/LIPC_STCP_CHECK: Data stays in the receive buffer for an over long time. Owner=comsh, VRF=0, local address/port=2128/25517, remote address/port=2112/14610.

%@7943%Oct 26 22:53:16:457 2023 SDYT-SC2-CDN-2-SNS-SW10-H3CS7610E LIPC/4/LIPC_STCP_CHECK: Data stays in the receive buffer for an over long time. Owner=comsh, VRF=0, local address/port=2128/25515, remote address/port=2096/14610.

、

现场设备为S7506E-X,软件版本为Release 7624P12，出现日志告警，但是告警是不定时出现

查看日志手册

该问题确认是软件已知问题，在R7625版本以及后续版本解决:

问题原因：

Comsh模块的某流程krpc通信通息残留在缓冲区里无人接收，平台定时检测机制（3分钟）检测到并打印告警信息。需要等下一次触发相同krpc通信流程才能被回收；

该打印对业务无影响，只是一个打印日志；从最新收集的诊断来看，已经恢复了。

最后一条打印记录：

%@12875%Oct 27 00:17:09:351 2023 SDYT-SC2-CDN-2-SNS-SW10-H3CS7610E LIPC/4/LIPC_STCP_CHECK: Data stays in the receive buffer for an over long time. Owner=comsh, VRF=0, local address/port=2128/25505, remote address/port=2048/14610.

问题触发后，可尝试通过收集一次诊断恢复，诊断里有大量的命令，通过诊断命令 触发相同krpc通信流程；如下时间点收集完诊断后就不再打印了。

%@12880%Oct 27 00:18:18:423 2023 SDYT-SC2-CDN-2-SNS-SW10-H3CS7610E SHELL/6/SHELL_CMD_INPUT: Input string for the display diagnostic-information

如果要彻底解决，建议升级7634P11版本。