现场需要两台AP做在5G频段无线Mesh桥接
配置完成后,发现2.4G射频口可以成功桥接,但5G射频对应的radio 1没有建立邻居
对照AP配置:
wlan mesh-profile 1
mesh-id 1
akm mode sae
preshared-key pass-phrase cipher $c$3$OXjYYcr4mJxBgqPc3I+iUw8i133l27iozZOQo+66/w==
mesh-profile enable
#
interface WLAN-Radio1/0/1
mesh-profile 1
mesh-interface 1
mesh peer-mac-address 8061-6c54-b2f0
channel 165
#
interface WLAN-Radio1/0/2
mesh-profile 1
mesh-interface 1
mesh peer-mac-address 8061-6c54-b2f0
channel 1
#
interface WLAN-Mesh1
port link-type trunk
undo port trunk permit vlan 1
port trunk permit vlan 100
#
AP2与AP1配置对称
对照配置后发现Radio1/0/1和Radio1/0/2配置的mesh peer mac相同
确认情况后发现Radio1/0/1配置的 mesh peer-mac-address 8061-6c54-b2f0为radio 1/0/2的2.4G射频口MAC地址,将此修改为Radio1/0/1对应的MAC地址后,Mesh邻居建立成功,可以ping通
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作