现场F1000防火墙与对端f100建立ipsec
F100侧pingf1000侧ping不通,一二阶段隧道sa都有,协商没有问题,但是数据不通
Debug看被ipsec给丢了
*Jun 25 07:55:21:004 2024 HRB-H3F100C-VPNA IPFW/7/IPFW_INFO: -COntext=1;
MBUF was intercepted! Phase Num is 9(post routing beforefrag), Service ID is 28(ipsec), Bitmap is 800000000, return 1(0:continue, 1:dropped, 2:consumed, 3:enqueued, 4:relay)! Interface is GigabitEthernet1/0/1,
s= 10.8.6.2, d= 10.3.10.10, protocol= 1, pktid = 56622
VsysID = 1.
查看现场配置,包括策略模板和策略,都不能使用相同的感兴趣流
ipsec policy-template 1 1
transform-set GE1/0/1_IPv4_1
security acl 3001
local-address 1.1.1.1
remote-address 2.2.2.2
ike-profile GE1/0/1_IPv4_1
#
ipsec policy-template 2 1
transform-set GE1/0/1_IPv4_1
security acl 3001
local-address 1.1.1.1
remote-address 3.3.3.3
ike-profile GE1/0/1_IPv4_2
#
感兴趣流不能deny ip
acl advanced 3001
rule 1 permit ip source 10.1.0.0 0.0.255.255 destination 10.2.0.0 0.0.255.255
rule 100 deny ip
去掉冲突/重叠的acl,acl去掉deny后正常
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作