如何检查设备是否是堆叠形态?
登录全部设备包含交换机,防火墙,负载均衡。查看是否存在IRF,如果是IRF形态,则需要检查是否配置桥MAC永久保留。
检查方法:
1. 在全部IRF形态的设备上执行如下命令进行确认:
<ADDC5.0-leaf-2>display irf configuration
MemberID NewID IRF-Port1 IRF-Port2
1 1 disable disable
<ADDC5.0-leaf-2>
2. 在全部IRF形态的设备上执行如下命令进行确认:
<ADDC5.0-leaf-2>display irf
MemberID Role Priority CPU-Mac Description
*+1 Master 1 00e0-fc0f-8c02 ---
--------------------------------------------------
* indicates the device is the master.
+ indicates the device through which the user logs in.
The bridge MAC of the IRF is: 50da-00f1-ed74
Auto upgrade : yes
Mac persistent : always
Domain ID : 0
说明:
1、 执行display irf configuration命令,查看当前设备的MemberID是否大于1行,如果大于1行说明设备是堆叠形态,如果仅有1行则表明设备为单机形态无需进行该项目检查。
2、 执行display irf命令,查看MAC地址保留项是否为“always”,配置为always则通过。
堆叠形态的设备全部需要配置IRF桥MAC永久保留功能
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作