本案例采用ENSP模拟器来部署华为路由器的路由重分布的案例,在该网络中,R1与R2部署ISIS,R2与R3部署默认路由。为了实现PC之间的网络互通,需要在R2路由器部署ISIS与默认路由重分布。
1、按照网络拓扑图配置IP地址。
2、部署R1与R2的ISIS。
3、部署R2与R3的默认路由。
4、在R2配置ISIS与默认路由重分布。
R1:
<Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>u t d
Info: Current terminal debugging is off.
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R1
[R1]int eth 0/0/0
[R1-Ethernet0/0/0]ip address 192.168.1.1 24
[R1-Ethernet0/0/0]quit
[R1]int eth 0/0/1
[R1-Ethernet0/0/1]ip address 10.0.0.1 30
[R1-Ethernet0/0/1]quit
[R1]isis 1
[R1-isis-1]network-entity 10.0000.0000.0001.00
[R1-isis-1]is-level level-1-2
[R1-isis-1]quit
[R1]int eth 0/0/1
[R1-Ethernet0/0/1]isis enable 1
[R1-Ethernet0/0/1]quit
[R1]int eth 0/0/0
[R1-Ethernet0/0/0]isis enable 1
[R1-Ethernet0/0/0]quit
R2:
<Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>u t d
Info: Current terminal debugging is off.
<Huawei>system
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R2
[R2]int eth 0/0/0
[R2-Ethernet0/0/0]ip address 10.0.0.2 30
[R2-Ethernet0/0/0]quit
[R2]int eth 0/0/1
[R2-Ethernet0/0/1]ip address 10.0.0.5 30
[R2-Ethernet0/0/1]quit
[R2]ip route-static 0.0.0.0 0.0.0.0 10.0.0.6
[R2]isis 1
[R2-isis-1]default-route-advertise always
[R2-isis-1]network-entity 10.0000.0000.0002.00
[R2-isis-1]quit
[R2]int eth 0/0/0
[R2-Ethernet0/0/0]isis enable 1
[R2-Ethernet0/0/0]quit
[R2]int eth 0/0/1
[R2-Ethernet0/0/1]isis enable 1
[R2-Ethernet0/0/1]quit
R3:
<Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>u t d
Info: Current terminal debugging is off.
<Huawei>system
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R3
[R3]int eth 0/0/0
[R3-Ethernet0/0/0]ip address 192.168.2.1 24
[R3-Ethernet0/0/0]quit
[R3]int eth 0/0/1
[R3-Ethernet0/0/1]ip address 10.0.0.6 30
[R3-Ethernet0/0/1]quit
[R3]ip route-static 0.0.0.0 0.0.0.0 10.0.0.5
PC分别填写IP地址,且能相互PING通。
在R1与R2分别使用dis isis peer命令查看到R1、R2已完成ISIS邻居的建立。
分别在R1、R2、R3使用dis ip routing-table命令查看路由表,均已学习到了相应的路由。
至此,华为路由器ISIS与默认路由典型组网配置案例已完成。
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作