利用远程镜像VLAN实现本地镜像支持多目的端口配置举例(非固定反射端口方式)但是没有成功,目的口没有流量
查看镜像配置正常
[SR8808-X]dis mi 1
Mirroring group 1:
Type: Remote source
Status: Active
Mirroring port: Ten-GigabitEthernet6/1/1 Both
Reflector port: Ten-GigabitEthernet6/1/2
Remote probe VLAN: 4000
[SR8808-X]dis vl 4000
VLAN ID: 4000
VLAN type: Static
Route interface: Not configured
Description: VLAN 4000
Name: VLAN 4000
Tagged ports: None
Untagged ports:
GigabitEthernet3/0/11 //目的接口
[SR8808-X-vlan4000]d c r i i
Usage: Bandwidth utilization in percentage
Interface Usage (%) Total (pps) Broadcast (pps) Multicast (pps)
GE3/0/11 0 0 -- --
XGE6/1/1 10 844615 0 0
XGE6/1/2 10 844606 0 0
Vlan4000 -- 0 -- --
[SR8808-X-vlan4000]d c r o i
Usage: Bandwidth utilization in percentage
Interface Usage (%) Total (pps) Broadcast (pps) Multicast (pps)
GE3/0/11 0 0 -- --
XGE6/1/1 0 0 0 0
XGE6/1/2 10 844609 0 0
Vlan4000 -- 0 -- --
发现反射端口有学到mac表项
[SR8808-X-vlan4000]dis mac-address
MAC Address VLAN ID State Port/Nickname Aging
0cda-3232-8002 4000 Learned XGE6/1/2 Y
0cda-3232-807e 4000 Learned XGE6/1/2 Y
经确认反射端口学到mac表项的情况下打流会导致出端口观察不到流量,
查看配置已经在vlan 4000下配置了undo mac-address mac-learning enable
删除反射端口再重新配置反射端口后正常
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作