当采用独立模式预配置IRF时,按常规使用两条链路做IRF时,切换成IRF模式后无法成功堆叠,这时需要再将另外的两个接口shutdown后加入irf-port后,重新将接口undo shutdown 时会报错:Bind all interfaces in the same group to IRF ports or cancel the bindings on all of them.
Bind all interfaces in the same group to IRF ports or cancel the bindings on all of them.
将irf-port下的接口均删除。再将物理端口updown下,再重新将4个物理接口加入irf-port内,物理接口就可以undo shutdown了。
另外:
堆叠接口上不能插千兆的模块,包括仅仅将千兆模块插在上面未接线也不行
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作