如何在CLI下配置6125交换机管理地址
先OA connect interconnect X的方式连接到6125上然后按一下命令配置
<6125G Blade Switch>system-view
[6125G Blade Switch]interface M-Ethernet 0/0/0
[6125G Blade Switch-M-Ethernet0/0/0]ip address dhcp-alloc
[6125G Blade Switch-M-Ethernet0/0/0]quit
[6125G Blade Switch]save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/config.cfg]
(To leave the existing filename unchanged, press the enter key):
flash:/config.cfg exists, overwrite? [Y/N]:
Before pressing ENTER you must choose &#39;YES&#39; or &#39;NO&#39;[Y/N]:y
Validating file. Please wait....
The current configuration is saved to the active main board successfully.
Configuration is saved to device successfully
配置成功后重新到oa的EBIPA界面配置管理ip即可。
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作