一、 组网需求：
SR66SR66-X系列路由器部分设备V7版本已经陆续发布，其中SR6600系列路由器需要更换支持V7平台的RPE-X3主控以及BKEC扩展板，而SR6602-X以及SR66-X路由器可以平滑升级至V7版本不需要更换硬件，但是需要单独将V5 Bootware升级到V7 Bootware。下面为大家介绍一下SR66系列路由器V5升级V7步骤。
二、 组网图：
三、 配置步骤：
升级V5 Bootware到V7 Bootware
(1) 重启设备，当出现“Press Ctrl+B to enter extended boot menu...”时，键入
Press Ctrl+B to enter extended boot menu...
BootWare password: Not required. Please press Enter to continue.
Password recovery capability is enabled.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): 7
(2) 对于SR6602-X路由器，需要在BootWare主菜单下键入
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9):
Warning:All files on flash will be lost! Are you sure to format? [Y/N]Y.....
...........................
Format success.
(3) 在BootWare主菜单下选择<7>可以进入BootWare操作子菜单：
=========================
|Note:the operating device is cfa0 |
|<1> Backup Full BootWare |
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |
|<4> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):4
(4) 在BootWare操作子菜单选择<4>，进入以太网口配置菜单：
===================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):4
==========================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :SR66V3.bin
:RSE-X2-CMW710.btw
Target File Name :SR66V3.bin
:RSE-X2-CMW710.btw
Server IP Address :192.168.100.4
Local IP Address :192.168.100.11
Gateway IP Address :192.168.100.11
FTP User Name :liujunjie
FTP User Password :1
表1-1 以太网参数设置说明
|
显示 |
说明 |
|
'.' = Clear field |
快捷键：“.”表示清除当前输入 |
|
'-' = Go to previous field |
快捷键：“-”表示返回到前一个参数域 |
|
Ctrl+D = Quit |
快捷键：表示退出参数配置界面 |
|
Protocol (FTP or TFTP) |
使用的传输协议，可以为FTP或者TFTP |
|
Load File Name |
下载文件名，要与下载的实际文件名一致 |
|
Target File Name |
存储的目标文件名。建议与服务器端文件名一致 |
|
Server IP Address |
TFTP/FTP服务器的IP地址。 |
|
Local IP Address |
本地IP地址，为TFTP/FTP客户端设置的IP地址 |
|
Gateway IP Address |
网关IP地址。当与服务器不在同一网段时需要配置网关地址。 |
|
FTP User Name |
FTP用户名，传输协议为TFTP时，忽略此选项 |
|
FTP User Password |
FTP用户密码，传输协议为TFTP时，忽略此选项 |
(5) 选择<1>，下载Comware V7版本BootWare文件。
===================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 1
Loading................Done!
675268 bytes downloaded!
Updating Basic BootWare? [Y/N]Y
Updating Basic BootWare...............Done!
Updating Extend BootWare? [Y/N]Y
Updating Extend BootWare..........Done!
(6) 返回BootWare主菜单，选择<0>，重启设备。
===================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 0
=========================
|Note:the operating device is cfa0 |
|<1> Backup Full BootWare |
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |
|<4> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 0
===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9):0
加载Comware V7版本文件
(7) 设备重启后直接进入Comware V7 BootWare主菜单。
BootWare Validating...
Image program does not exist.
Password recovery capability is enabled.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9):3
(8) 在BootWare主菜单下键入<3>可以进入以太网口子菜单，然后键入<5>就可以进入以太网口配置菜单：
==========================
|Note:the operating device is cfa0 |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|
============================================================================
Enter your choice(0-5): 5
==========================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :HSR68_Bootware_V5.btw
:sr66x1-rse.ipe
Target File Name :HSR68_Bootware_V5.btw
:sr66x1-rse.ipe
Server IP Address :192.168.100.4
Local IP Address :192.168.100.13
Subnet Mask :255.255.255.0
Gateway IP Address :192.168.100.13
FTP User Name :123456
FTP User Password :******
(9) 键入<2>，下载Comware V7启动文件：
==========================
|Note:the operating device is cfa0 |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|
============================================================================
Enter your choice(0-5): 2 Loading.....................................................................
............................................................................
............................................................................
............................................................................
......Done.
256792576 bytes downloaded!
Image file sr66x1-cmw710-boot-A720101.bin is self-decompressing...
Saving file cfa0:/sr66x1-cmw710-boot-A720101.bin ...........................
............................................................................
............................................................................
.......................Done.
Image file sr66x1-cmw710-system-A720101.bin is self-decompressing...
Saving file cfa0:/sr66x1-cmw710-system-A720101.bin .........................
............................................................................
............................................................................
.....................................................Done.
==========================
|Note:the operating device is cfa0 |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|
============================================================================
Enter your choice(0-5):0
(10) 选择<0>，返回BootWare主菜单。选择<1>，引导系统，完成升级。
===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): 1
Loading.....................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
......Done.
256792576 bytes downloaded!
Loading file sr66x1-cmw710-boot-A720101.bin...Done!
copy file sr66x1-cmw710-boot-A720101.bin(pkgcode:1) to
0x22e9800@0xe0001000
Loading file sr66x1-cmw710-system-A720101.bin...Done!
copy file sr66x1-cmw710-system-A720101.bin(pkgcode:2) to
0xd1fa400@0xe22eb000
Image file sr66x1-cmw710-boot-A720101.bin is self-decompressing.............
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................Done.
System image is starting...Cryptographic Algorithms Known-Answer Tests are runni
ng ...
CPU 0 of slot 0 in chassis 0:
Starting Known-Answer tests in the user space.
Known-answer test for SHA1 passed.
Known-answer test for SHA224 passed.
Known-answer test for SHA256 passed.
Known-answer test for SHA384 passed.
Known-answer test for SHA512 passed.
Known-answer test for HMAC-SHA1 passed.
Known-answer test for HMAC-SHA224 passed.
Known-answer test for HMAC-SHA256 passed.
Known-answer test for HMAC-SHA384 passed.
Known-answer test for HMAC-SHA512 passed.
Known-answer test for AES passed.
Known-answer test for RSA(signature/verification) passed.
Known-answer test for RSA(encrypt/decrypt) passed.
Known-answer test for DSA(signature/verification) passed.
Known-answer test for random number generator passed.
Known-Answer tests in the user space passed.
Starting Known-Answer tests in the kernel.
Known-answer test for SHA1 passed.
Known-answer test for HMAC-SHA1 passed.
Known-answer test for AES passed.
Known-answer test for random number generator passed.
Known-Answer tests in the kernel passed.
Starting Known-Answer tests in the engine.
Known-answer test for SHA1 passed.
Known-answer test for HMAC-SHA1 passed.
Known-answer test for AES passed.
Known-answer test for RSA(signature/verification) passed.
Known-answer test for RSA(encrypt/decrypt) passed.
Known-answer test for DSA(signature/verification) passed.
Known-answer test for random number generator passed.
Known-Answer tests in the engine passed.
Cryptographic Algorithms Known-Answer Tests passed.
Line con0 is available.
Press ENTER to get started.
(11) 设备启动后，使display version命令查看设备版本，显示如下类似信息表示升级成功：
H3C Comware Software, Version 7.1.054, A720101
Copyright (c) 2004-2014 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
H3C SR6605-F uptime is 0 weeks, 0 days, 0 hours, 5 minutes
Last reboot reason : User reboot
Boot image: mld:/boot.bin
Boot image version: 7.1.054, A720101
Compiled May 21 2014 12:47:12
System image: mld:/system.bin
System image version: 7.1.054, A720101
Compiled May 21 2014 12:47:12
Slot 0: RSE-X2 uptime is 0 week, 0 day, 0 hour, 5 minutes
CPU type: FREESCALE P2020 1000MHz
4096M bytes DDR3 SDRAM Memory
8M bytes Flash Memory
128K bytes NVRAM
Basic Logic Version: 134.0
Extend Logic Version: 138.0
Basic BootWare Version: 2.00
Extend BootWare Version: 2.00
[FIXED PORTS] Console (Hardware)Ver.A, (Driver)1.0, (Cpld)138.0
[FIXED PORTS] AUX (Hardware)Ver.A, (Driver)1.0, (Cpld)138.0
[FIXED PORTS] MGE (Hardware)Ver.A, (Driver)1.0, (Cpld)138.0
四、 配置关键点：
1. SR6602-X设备V5升级V7 Bootware时，需要先格式化Flash，而SR66X设备不需要格式化Flash；
2. SR6602-X的Bootware与SR66-X的Bootware不一样，两者不可混用；
3. 如果升级失败，希望回退V5版本，按照上述步骤，将V7 Bootware回退为V5 Bootware，然后加载V5软件版本即可；
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证，请认证邮箱或绑定手机后进行当前操作