本案例适用于如F1000-A-G2、F1000-S-G2、F100-M-G2、F100-S-G2等F1000-X-G2、F100-X-G2系列的防火墙。
注:此案例是在F1060的Version 7.1.064, Release 9323P14版本上进行配置和验证的。
#以下黑色字体部分为设备自动打印部分,标红加粗的命令是需要手动输入。
<H3C>reset saved-configuration
The saved configuration file will be erased. Are you sure? [Y/N]:Y //确定删除保存的配置文件
<H3C>reboot
Start to check configuration with next startup configuration file, please wait.........DONE!
This command will reboot the device. Current configuration will be lost, save current configuration? [Y/N]:N //不保存配置
This command will reboot the device. Continue? [Y/N]:Y //继续重启
确认后,设备将恢复到出厂设置并重新启动。
#点击“系统”>“维护”>“配置文件”>“恢复出厂配置”,点击确定后,设备重启后即可恢复出厂
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作