M9000防火墙板卡用紧耦合版本误升级松耦合板卡上dis boot-load出现异常

不涉及

M9014设备备框8槽到11槽之前因为工程师升错版本，生成了R9131P24，后来把这四块业务板升级到了Release 8514P17，dis version显示正常，文件中已经把P24这个系统文件删除，但是dis boot-loader显示Operation failed.，且Main startup software images显示P24版本信息。

dis version

H3C Comware Software, Version 7.1.064, Release 8514P17

Copyright (c) 2004-2018 New H3C Technologies Co., Ltd. All rights reserved.

H3C SecBlade IV NGFW Module uptime is 0 weeks, 3 days, 9 hours, 38 minutes

Last reboot reason: User reboot

dis boot-loader

Software images on slot 1:

Current software images:

Operation failed.

Main startup software images:

  sda0:/BLADE4FWM9000-CMW710-BOOT-R9131P24.bin

  sda0:/BLADE4FWM9000-CMW710-SYSTEM-R9131P24.bin

Backup startup software images:

  None

dir

Directory of sda0:

   0 -rw-     5471232 Jan 19 2019 11:12:07   BLADE4FW-CMW710-BOOT-R8514P17.bin

   1 -rw-   118775808 Jan 19 2019 11:12:10   BLADE4FW-CMW710-SYSTEM-R8514P17.bin

   2 -rw-   124254208 Jan 19 2019 11:05:18   SECBLADEIVNGFW-CMW710-R8514P17.ipe

   3 -rw-     5470208 Dec 18 2018 06:14:56   blade4fw-cmw710-boot-r8514p20.bin

   4 -rw-   118917120 Dec 18 2018 06:15:00   blade4fw-cmw710-system-r8514p20.bin

   5 drw-           - Dec 18 2018 06:16:22   diagfile

   6 -rw-         735 Dec 18 2018 06:16:36   hostkey

   7 -rw-         249 Jan 17 2019 13:57:52   ifindex.dat

   8 drw-           - Dec 18 2018 06:16:22   license

   9 drw-           - Dec 28 2018 10:34:26   logfile

  10 drw-           - Dec 18 2018 06:16:34   pki

  11 drw-           - Dec 18 2018 06:16:22   seclog

  12 -rw-         591 Dec 18 2018 06:16:36   serverkey

  13 -rw-        5692 Jan 17 2019 13:57:52   startup.cfg

  14 -rw-       79074 Jan 17 2019 13:57:52   startup.mdb

  15 drw-           - Dec 28 2018 10:35:36   versionInfo

7647624 KB total (7283264 KB free)

boot-loader file boot slot1#da0:/BLADE4FW-C10-BOOT-R8514P17.bin s

ystem slot1#sda0:/BLADE4FW-CMW710-SYSTEM-R8514P17.bin all main

Operation failed.

经实验室验证，错升紧耦合版本后，在升到松耦合版本会出现这种情况，导致下次启动还会启动紧耦合版本。

需要重新进bootrom下重新升级一下，
==================================================== 
|Note:the operating device is sda0 | 
|<1> Download Image Program To SDRAM And Run | 
|<2> Update Main Image File | 
|<3> Update Backup Image File | 
|<4> Download Files(*.*) | 
|<5> Modify Ethernet Parameter | 
|<0> Exit To Main Menu | 
| | 
============================================================================ 
Enter your choice(0-5): 2                               
在这一步选择2，之后退到主菜单然后选择0重启
==================================================== 
|<1> Boot System | 
|<2> Enter Serial SubMenu | 
|<3> Enter Ethernet SubMenu | 
|<4> File Control | 
|<5> Restore to Factory Default Configuration | 
|<6> Skip Current System Configuration | 
|<7> BootWare Operation Menu | 
|<8> Skip Authentication for Console Login | 
|<9> Storage Device Operation | 
|<0> Reboot | 
============================================================================ 
Ctrl+Z: Access EXTENDED ASSISTANT MENU 
Ctrl+C: Display Copyright 
Ctrl+F: Format File System 
Enter your choice(0-9): 0 
通过以上步骤可以解决问题