A:如果要在无线控制器上Telnet到AP的话,要先在控制器上开启AP的Telnet功能,方法如下,其中XXX代表AP的名字
[AC1]_h
Now you enter a hidden command view for developer's testing, some commands may affect operation by wrong use, please carefully use it with our engineer's direction.
[AC1-hidecmd]wlan ap-execute XXX telnet enable
[AC1-hidecmd]wlan ap-execute XXX exec-control enable
查看AP的IP地址后就可以Telnet登录了。
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作