WX3000E系列切换切换交换板密码忘记

WX3000E系列切换切换交换板密码忘记

WX3000E系列AC，用命令oap connect  slot 0 切换至交换板的密码忘记了，telnet登陆交换板的密码也忘记了，可以采取跳过AC板跟交换板的配置重新启动来修改配置解决。  

一、wx3000

3000（3010、3024、3008）交换侧与无线侧共用忽略配置启动标志。

重启设备，ctrl+b进入bootware菜单选择6忽略配置，两侧同时忽略。

二、wx3000E(3010e、3024e):

1.ac侧，端口1配置成shutdown

[H3C]interface GigabitEthernet 1/0/1

[H3C-GigabitEthernet1/0/1]shutdown

2. ac侧，保持配置

<H3C>save

3. 重启设备

4. 重启后，由于端口1是down的，交换侧获取不到版本一起在request状态，o c s 0登录交换侧应该是下面的这个态

<H3C>o c s 0

Press CTRL+K to quit.

Connected to OAP.

Request File:

Request File:

Request File:

Request File:                                                                  

Request File:                                                                  

Request File:                                                                  

Request File:                                                                  

Request File:                                                                  

Request File:                                                                  

Request timer out!                                                             

System restart now                                                     

Starting......                                                               

  <----- 5.  交换侧长时间获取不到版本会重启本侧，等待启动时ctrl+b进入bootware，选6 skip配置，然后选0，重启交换侧Press Ctrl+D to access BASIC-BOOTWARE MENU                                     

Booting Normal Extend BootWare....                                             

The Extend BootWare is self-decompressing.......Done!                        

****************************************************************************   

*                                                                          *   

*                 H3C WX3010E-LSW BootWare, Version 2.00                   *   

*                                                                          *   

****************************************************************************   

Copyright (c) 2004-2013 Hangzhou H3C Technologies Co., Ltd.                   

Compiled Date       : Jan  8 2013                                              

CPU Type            : 98DXH325                                                  

CPU L1 Cache        : 32KB                                                     

CPU Clock Speed     : 333MHz                                                   

Memory Type         : DDR2 SDRAM                                                

Memory Size         : 128MB                                                    

Flash Size          : 16MB                                                     

CPLD Version        : 002                                                      

PCB Version         : Ver.C                                                    

Mac Address         : 5CDD7035C775                                             

Press Ctrl+B to enter extended boot menu...                                    

BootWare password: Not required. Please press Enter to continue.              

Password recovery capability is enabled.                                       

Note: The current operating device is flash                                    

Enter < Storage Device Operation > to select device.                            

===================<EXTEND-BOOTWARE MENU>=======================   

|<1> Boot System                                                           |   

|<2> Enter Serial SubMenu                                                  |   

|<3> Enter Ethernet SubMenu                                                |   

|<4> File Control                                                          |   

|<5> Restore to Factory Default Configuration                              |   

|<6> Skip Current System Configuration                                     |    

|<7> BootWare Operation Menu                                               |   

|<8> Clear Super Password                                                  |   

|<9> Storage Device Operation                                              |   

|<0> Reboot                                                                |   

=====================================================================  

Ctrl+Z: Access EXTEND-ASSISTANT MENU                                           

Ctrl+F: Format File System                                                     

Enter your choice(0-9): 6 

===============<EXTEND-BOOTWARE MENU>==========================   

|<1> Boot System                                                           |   

|<2> Enter Serial SubMenu                                                  |   

|<3> Enter Ethernet SubMenu                                                |   

|<4> File Control                                                          |    

|<5> Restore to Factory Default Configuration                              |   

|<6> Skip Current System Configuration                                     |   

|<7> BootWare Operation Menu                                               |   

|<8> Clear Super Password                                                  |   

|<9> Storage Device Operation                                              |   

|<0> Reboot                                                                |   

======================================================================

Ctrl+Z: Access EXTEND-ASSISTANT MENU                                           

Ctrl+F: Format File System                                                     

Enter your choice(0-9): 0

Starting......   

Press Ctrl+D to access BASIC-BOOTWARE MENU                                     

Booting Normal Extend BootWare....                                             

The Extend BootWare is self-decompressing.......Done!                                                                                                           

......                                                                 

6. ctrl+k退回到无线侧，将端口1，undo shutdown，交换侧开始获取版本并跳过配置启动；