R/AR系列路由器BOOTROM密码清除方法
1、BOOTROM超级密码
R系列路由器的BOOTROM密码缺省是没有的,若设置后丢失,只能使用万能密码进入BOOT菜单:WhiteLily2970013 (注意:万能密码区分大小写)
AR46 Bootrom 5.04的超级密码 :supperman
2、R/AR路由器清除密码方法
AR系列路由器BOOTROM9.07清除CONSOLE密码:
Press Ctrl-B to enter Boot Menu
Please input Bootrom password:
Boot Menu:
1: Download application program with XMODEM
2: Download application program with NET
3: Set application file type
4: Display applications in Flash
5: Clear application password
6: Start up and ignore configuration
7: Enter debugging environment
8: Boot Rom Operation Menu
9: Do not check the version of the software
a: Exit and reboot
Enter your choice(1-a):
选择5后选择a重启路由器
BOOTROM9.06
Boot Menu:
1: Download application program with XMODEM
2: Download application program with NET
3: Clear application password
4: Start up and ignore configuration
5: Enter debugging environment
6: Boot Rom Operation Menu
7: Do not check the version of the software
8: Exit and reboot
Enter your choice(1-8):
选择3然后再选择8重启路由器
BOOTROM7.06
Boot Menu:
1: Download application program with XMODEM
2: Download application program with NET
3: Clear application password
4: Start up and ignore configuration
5: Enter debugging environment
6: Boot Rom Operation Menu
7: Do not check the version of the software
8: Exit and reboot
Enter your choice(1-8):
选3后选8重启路由器
BOOTROM5.28
Press Ctrl-B to enter Boot Menu
Please input Boot ROM password:
Boot Menu:
1: Download application program with XMODEM
2: Download application program with NET
3: Clear configuration
4: Start up and ignore configuration
5: Boot ROM Operation Menu
6: Do not check the version of the software
7: Exit and reboot
Enter your choice(1-7):
选3会清除配置,选4会忽略配置以出厂设置启动,启动完毕后将路由器配置DOWN下后更改密码后再导入
BOOTROM5.1
Press Ctrl-B to enter Boot Menu
Please input Bootrom password:
Boot Menu:
1: Download application program
2: Download Bootrom program
3: Modify Bootrom password
4: Exit the menu
5: Reboot
Enter your choice(1-5):
按ctrl+p后再选择5来清除密码
3、忽略配置清除密码再导入配置步聚
(1)、重新配置路由器的以太网口地址
[Router-Ethernet1]ip address 192.168.10.1 255.255.255.0
(2)、保证PC与路由器的以太网口能够互通
(3)、在路由器上配置一个FTP帐号用来从PC中DOWN配置
[Router]local-user ftp password sim ftp ftp-directory flash:/
(4)、启动路由器上的FTP服务
[Router]ftp-server enable
(5)、PC的运行栏中输入CMD
FTP 192.168.10.1
输入用户名ftp密码ftp
hash
lcd c:\ 指定下载后的配置文件目录
get config
然后用写字本或记事本打开更改密码后再put上去(注意:上传以后不需要再保存配置,若再SAVE配置,则上传的配置会被覆盖。)
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作