SecPath防火墙PPPoE-Client的典型配置案例
一、 组网需求:
在一个ADSL环境中,SecPath防火墙如何配置成PPPOE-Client。
二、 组网图
三、 配置信息
1. SecPath防火墙A的主要配置
定义地址池
domain system
ip pool 1 202.38.1.2 202.38.1.100
创建PPPOE帐号
local-user test
password simple test
service-type ppp
创建虚模板
interface Virtual-Template1
ppp authentication-mode chap
ip address 202.38.1.1 255.255.255.0
remote address pool 1
在接口上启用PPPOE-Server
interface Ethernet0/0
pppoe-server bind Virtual-Template 1
2. SecPath防火墙B的主要配置
创建dialer拨号接口
interface Dialer1
link-protocol ppp
ppp chap user test
ppp chap password simple test
ip address ppp-negotiate
dialer user 1
dialer-group 1
dialer bundle 1
在接口上启用PPPOE-Client
interface Ethernet0/0
pppoe-client dial-bundle-number 1
四、 配置关键点
1、 除了LoopBack接口外,其它所有接口都必须加入到Zone下;
2、可以在虚模板下给PPPOE-Client客户指定一个IP地址;
3、虚模板下的接口地址可以不同于地址池中的地址;
4、Dialer接口下的dialer user可以是任何名字。
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作