When the alarm indicator is ON, the most possible reason is that the board temperature has exceeded the upper limit of temperature alarms. As the frame ventilation is not good, if there is too much dust in the air so that the air filter is blocked, the frame temperature may rise significantly. At this time, you need clear the air filter. The air filter is located on the right back of S9500 frame and can be pull out after fastening screws are loosed.
If it is due to high environment temperature rather than air filter being blocked, you can use the display environment command to view the current board temperature and temperature-limit to set the lower and upper limit.
Fan failure can also cause high board temperature.
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作