The aggregation ports of the same aggregation group are configured with the configuration command and need not to be continuous. The link-aggregation interface-name1 to interface-name2 command cannot set the aggregation port continuous while configuring link aggregation. Use the link-aggregation group agg-id command to create an aggregation group and then add the ports to the aggregation group in port mode, and the port need not be continuous.
Example: Add ports E4/1/1 and E4/1/3 to the aggregation group
[S9500]link-aggregation group 1 mode manual
[S9500]interface e4/1/1
[S9500-Ethernet4/1/1] port link-aggregation group 1
[S9500]interface e4/1/3
[S9500-Ethernet4/1/3] port link-aggregation group 1
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作