S3610_S5510系列交换机MLD Snooping模拟主机加入的配置
一 组网需求:
通过配置,使HostA和HostB不论是否加入了IPv6组播组FF1E::1,都能够收到发往IPv6组播组FF1E::1的IPv6组播数据。
二 组网图:
三 配置步骤:
1.配置VLAN
# 创建VLAN100。
<Switch> system-view
[Switch] vlan 100
# 把端口Ethernet1/0/1到Ethernet1/0/4添加到VLAN100中。
[Switch-vlan100] port Ethernet 1/0/1 to Ethernet 1/0/4
[Switch-vlan100] quit
2.配置模拟主机加入IPv6组播组
# 在VLAN100内使能MLD Snooping。
[Switch] mld-snooping
[Switch-mld-snooping] quit
[Switch] vlan 100
[Switch-vlan100] mld-snooping enable
[Switch-vlan100] quit
# 在Ethernet1/0/3上使能模拟主机加入IPv6组播组功能。
[Switch] interface Ethernet 1/0/3
[Switch-Ethernet1/0/3] mld-snooping host-join ff1e::1 vlan 100
[Switch-Ethernet1/0/3] quit
[Switch] interface Ethernet 1/0/4
[Switch-Ethernet1/0/4] mld-snooping host-join ff1e::1 vlan 100
[Switch-Ethernet1/0/4] quit
四 配置关键点:
1.可以通过命令display mld-snooping group vlan 100 verbose查看VLAN100内的IPv6组播组详细信息。
2.模拟主机加入建立的组播表项会老化,因此要求保证路由器端口能够周期性的收到查询报文以刷新表项,防止老化。
3.本案例还适用于H3C S5500系列交换机。
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作