MPLS TE热备份中如何判断路径的主备关系
Q:MPLS TE热备份中如何判断路径的主备关系?
A:可以通过display mpls te tunnel path来看各条路径的LSP ID,一般来说ID小的是主,也可以结合通过display mpls te tunnel-interface来查看back-up lsp ID来区分。
<msr>display mpls te tunnel path
Tunnel Interface Name : Tunnel0
Lsp ID : 1.1.1.1 :0 //LSPID为0,所以是主路径
Hop Information
Hop 0 1.2.0.1
Hop 1 1.2.0.2 Label 1024
Hop 2 2.2.2.2
Hop 3 2.3.0.2
Hop 4 2.3.0.3 Label 3
Hop 5 3.3.3.3
Tunnel Interface Name : Tunnel0
Lsp ID : 1.1.1.1 :2048 //LSPID为2048,所以是备路径
Hop Information
Hop 0 1.4.0.1
Hop 1 1.4.0.4 Label 1024
Hop 2 4.4.4.4
Hop 3 3.4.0.4
Hop 4 3.4.0.3 Label 3
Hop 5 3.3.3.3
<msr>
<msr>display mpls te tunnel-interface
Tunnel Name : Tunnel0
Tunnel Desc : Tunnel0 Interface
Tunnel Attributes :
LSP ID : 1.1.1.1:0 //主路径LSP ID为0
Session ID : 0
Ingress LSR ID : 1.1.1.1 Egress LSR ID: 3.3.3.3
Signaling Prot : RSVP Resv Style : SE
Class Type : CLASS 0 Tunnel BW : 20 kbps
Reserved BW : 20 kbps
Setup Priority : 7 Hold Priority: 7
Affinity Prop/Mask : 0x0/0x0
Explicit Path Name : -
Tie-Breaking Policy : None
Metric Type : None
Record Route : Enabled Record Label : Enabled
FRR Flag : Disabled BackUpBW Flag: Not Supported
BackUpBW Type : - BackUpBW : -
Route Pinning : Disabled
Retry Limit : 5 Retry Interval: 10 sec
Reopt : Disabled Reopt Freq : -
Back Up Type : HotStandBy
Back Up LSPID : 1.1.1.1:2048 //备份路径LSP ID为2048
Auto BW : Disabled Auto BW Freq : -
Min BW : - Max BW : -
Current Collected BW: -
Interfaces Protected: -
VPN Bind Type : NONE
VPN Bind Value : -
Car Policy : Disabled
<msr>
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作