Configuration of Voice Vlan on S3600
1 Network requirements:
Regard S3600-SI as an IP phone. S3600-SI packets with Vlan tag could PING S3600-EI’s gateway in many different ports which have the same configuration on S3600-EI. The following is the concrete allocation:
Voice Vlan: Vlan 2
Ethernet1/0/1 and Ethernet1/0/2 has the same configuration. S3600-SI could PING S3600-EI in either E1/0/1 or Ethernet1/0/2.
2 Network diagram:
3 Configuration procedure:
S3600-SI:
3.1 Enter system view:
<SwitchA>system
3.2 Create Vlan 2:
[SwitchA]vlan 2
3.3 Create Vlan 2 interface:
[SwitchA-vlan 2]int vlan 2
[SwitchA-vlan-interface2]ip address 10.1.1.1 8
3.4 Enter Ethernet1/0/1 port interface:
[SwitchA-vlan-interface2]quit
[SwitchA]int Ethernet1/0/1
3.5 Set port type of Ethernet1/0/1 as TRUNK and permit Vlan 1 and 2:
[SwitchA-Ethernet1/0/1]port link-type trunk
[SwitchA-Ethernet1/0/1] port trunk permit vlan 1 to 2
S3600-EI:
3.6 Enter system view:
<SwitchB>system
3.7 Create Vlan 2:
[SwitchB]vlan 2
3.8 Create Vlan 2 interface:
[SwitchB-vlan 2]int vlan 2
[SwitchB-vlan-interface2]ip address 10.1.1.2 8
3.9 Create Vlan 5:
[SwitchB-vlan-interface2]quit
[SwitchB]vlan 5
[SwitchB-vlan 5]quit
3.10 Set port type of Ethernet1/0/1 as TRUNK and PVID as Vlan 5:
[SwitchB] interface Ethernet 1/0/1
[SwitchB-Ethernet1/0/1]port link-type trunk
[SwitchB-Ethernet1/0/1]port trunk pvid vlan 5
3.11 Enable Voice Vlan and set auto mode:
[SwitchB-Ethernet1/0/1] voice vlan enable
[SwitchB-Ethernet1/0/1]voice vlan mode auto
3.12 Configure Ethernet 1/0/2 as the same as Ethernet1/0/1:
[SwitchB-Ethernet1/0/1] interface Ethernet1/0/2
[SwitchB-Ethernet1/0/2]port link-type trunk
[SwitchB-Ethernet1/0/2]port trunk pvid vlan 5
[SwitchB-Ethernet1/0/2]voice vlan enable
[SwitchB-Ethernet1/0/2]voice vlan mode auto
3.13 Set OUI address:
[SwitchB-Ethernet1/0/2] quit
[SwitchB] voice vlan mac-address 00e0-bb00-0000 ffff-ff00-0000
3.14 Enable Voice Vlan function globally:
[SwitchB] voice vlan 2 enable
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作