WX5002与iNode客户端配合实现本地802.1x认证功能的典型配置
适用WX5002版本:Comware Software, Version 5.00, ESS 1102P01
适用iNode客户端版本:CH V2.40-R0213
一、组网需求
WX5002、WA2110、H3C POE交换机、便携机(安装有11b/g无线网卡)
二、组网图
WX5002的IP地址为192.168.1.99。
交换机作为二层交换机使用,WX5002和WA2110在同一VLAN。
WA2110的序列号为h3c000fe258e830,使用的SSID的名称为h3c-dot。
用户名为111,密码为111。
三、WX交换机的典型配置
#
version 5.00, ESS 1102P01
#
sysname H3C
#
domain default enable system
#
port-security enable
#
vlan 1
#
domain system
access-limit disable
state active
idle-cut disable
self-service-url disable
#
dhcp server ip-pool pool1
network 192.168.1.0 mask 255.255.255.0
gateway-list 192.168.1.254
expired day 3
#
local-user 111
password simple 111
service-type lan-access
#
wlan service-template 2 clear
ssid h3c-dot
bind WLAN-ESS 2
authentication-method open-system
service-template enable
#
wlan rrm
11a mandatory-rate 6 12 24
11a supported-rate 9 18 36 48 54
11b mandatory-rate 1 2
11b supported-rate 5.5 11
11g mandatory-rate 1 2 5.5 11
11g supported-rate 6 9 12 18 24 36 48 54
#
interface NULL0
#
interface Vlan-interface1
ip address 192.168.1.99 255.255.255.0
#
interface GigabitEthernet1/0/1
#
interface GigabitEthernet1/0/2
#
interface M-Ethernet1/0/1
#
interface WLAN-ESS2
port-security port-mode userlogin-secure-ext
#
wlan ap ap1 model WA2100
serial-id h3c000fe258e830
radio 1 type 11g
service-template 2
radio enable
#
dhcp enable
#
user-interface aux 0
user-interface vty 0 4
#
return
四、客户端的配置
1、在Windows无线客户端中选择连接SSID h3c-dot。
2、在iNode客户端中创建802.1x连接并进行认证。
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作