Quidway S5100系列交换机升级后软件显示设备品牌错误的解决方法
一、 问题描述:
如果在S5100-VRP-E0001(内部版本号为S5100V200R001B01D021SP02,Bootrom 版本号为120)版本上升级到新的版本S5100-VRP-R0001(内部版本号为S5100V200R001B01D025SP01,Bootrom版本号为123)及其以后版本,重启后会发现软件中显示的设备品牌为H3C。
二、 原因分析:
S5100-VRP-E0001(内部版本号为S5100V200R001B01D021SP02,Bootrom 版本号为120)版本没有保存产品的品牌信息,加载新版本后如果无法读取到产品的相关信息,便会按照默认值H3C品牌处理。
三、 解决方法:
请升级版本后在装备视图下执行以下命令切换到Quidway品牌
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C]_
Now you enter a hidden command view for developer's testing, some commands may
affect operation by wrong use, please carefully use it with our engineer's
direction.
[H3C-hidecmd]en
Are you sure to test your equipment? Yes or No (Y/N)y
Password: //密码为huaweihuawei
NOTICE: Commands under this mode may influence the machine's configuration data,
so you need to ensure that your configure has been saved to flash before executi
ng them and reset the machine after executing them.
[H3C-equipment]_config product type huawei
Product type change from H3C to Quidway set OEM key 1
[H3C-equipment]
重启设备后,软件显示恢复为Quidway品牌。
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作