The configuration of PM-DM on H3C 5600 switches
I Requirement for the diagram
1. There are three 5600 switches:switchA,switchB,switchC. Multicast tool has been installed in PCA.
2. Version: release 1508
3. Implement multicast among PCA, PCB, PCC. via running PIM-DM.
1. PCA is the multicast source, switchA connects to PCA via VLAN10 interface, and connects to switchB via VLAN11 interface,and connects to switchC via VLAN12 interface.
2. SwitchB connects to PCB via VLAN20 interface, and switchC connects to PCC via VLAN30 interface.
III Steps of configuration
The configuration of switchA:
1. rename the switchA
[H3C]sysname SwitchA
2. start Multicast Routing Protocol
[SwitchA] multicast routing-enable
3. create VLAN10
[SwitchA] vlan 10
4. add the port into VLAN10
[SwitchA -vlan10] port GigabitEthernet 1/0/1 to GigabitEthernet 1/0/10
5. create VLAN11
[SwitchA -vlan10] vlan 11
6. add the port into VLAN11
[SwitchA -vlan11] port GigabitEthernet 1/0/11
7. create VLAN 12
[SwitchA -vlan11] vlan 12
8. add the port into VLAN12
[SwitchA -vlan12] port GigabitEthernet 1/0/12
9. enter into VLAN10 interface
[SwitchA -vlan12] interface vlan-interface 10
10. configure the ip address for VLAN10 interface
[SwitchA-vlan-interface10] ip address 1.1.1.1 255.255.255.0
11. start IGMP on VLAN10 interface
[SwitchA-vlan-interface10] igmp enable
12. start PIM-DM on VLAN10 interface
[SwitchA-vlan-interface10] pim dm
13. enter into VLAN11 interface
[SwitchA-vlan-interface10] interface vlan-interface 11
14. configure the ip address for VLAN11 interface
[SwitchA-vlan-interface11] ip address 1.1.2.1 255.255.255.0
15. start IGMP on VLAN11 interface
[SwitchA-vlan-interface11] igmp enable
16. start PIM-DM on VLAN11 interface
[SwitchA-vlan-interface11] pim dm
17. enter into VLAN12 interface
[SwitchA-vlan-interface11] interface vlan-interface 12
18. configure the ip address for VLAN12 interface
[SwitchA-vlan-interface12] ip address 1.1.3.1 255.255.255.0
19. start IGMP on VLAN12 interface
[SwitchA-vlan-interface12] igmp enable
20. start PIM-DM on VLAN12 interface
[SwitchA-vlan-interface12] pim dm
The configuration of switchB is the same as switchA.
The configuration of switchC is the same as switchA.
IV Key notes in the configuration
1. Start PIM-DM on all interface port, after Multicast Routing Protocol enable under the system view.
2. The case is fit for H3C S3600,Quidway S3900,Quidway S5600.
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作