The configuration of RMON on H3C 5600 switch
I Requirement for the diagram
1. Before configure the function of RMON, you should ensure that the SNMP Agent has been configured correctly already.
2. Set a entry in RMON Ethernet statistic entry to query Ethernet port Performance Statistics.
II Network topology.
III Steps of configuration
1. configure RMON
<Switch> system-view
[Switch] interface Ethernet1/0/1
[Switch-Ethernet1/0/1] rmon statistics 1 owner user1-rmon
2. display RMON
[Switch-Ethernet1/0/1] display rmon statistics Ethernet1/0/1
Statistics entry 1 owned by user1-rmon is VALID.
Interface : Ethernet1/0/1<ifIndex.4227626>
etherStatsOctets : 0 , etherStatsPkts : 0
etherStatsBroadcastPkts : 0 , etherStatsMulticastPkts : 0
etherStatsUndersizePkts : 0 , etherStatsOversizePkts : 0
etherStatsFragments : 0 , etherStatsJabbers : 0
etherStatsCRCAlignErrors : 0 , etherStatsCollisions : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length:
64 : 0 , 65-127 : 0 , 128-255 : 0
256-511: 0 , 512-1023: 0 , 1024-1518: 0
IV Key notes in the configuration
None.
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作