Typical Configuration Of PPP MP on AR28、AR46 Series Routers--Directly Binding the Link to VT

Typical Configuration Of PPP MP on AR28、AR46 Series Routers--Directly Binding the Link to VT

[Requirements]

RouterA and RouterB interwork through the MP link, realizing higher bandwidth and reliability.

[Networking diagram]

[Configuration script]

Configuration script (RouterA)

# sysname RouterA # radius scheme system # domain system # interface Virtual-Template0          /Create a VT interface/ ip address 10.1.1.1 255.255.255.0 # interface Serial1/0 link-protocol ppp ppp mp Virtual-Template 0        /Bind the physical port with VT0/ # interface Serial1/1 link-protocol ppp ppp mp Virtual-Template 0       /Bind the physical port with VT0/ # interface NULL0 # user-interface con 0 user-interface vty 0 4 # return

Configuration script (RouterB)

# sysname RouterB # radius scheme system # domain system # interface Virtual-Template0          /Create a VT interface/ ip address 10.1.1.2 255.255.255.0 # interface Serial1/0 link-protocol ppp ppp mp Virtual-Template 0       /Bind the physical port with VT0/ # interface Serial1/1 link-protocol ppp ppp mp Virtual-Template 0       /Bind the physical port with VT0/ # interface NULL0 # user-interface con 0 user-interface vty 0 4 # return

 

[Verification]

Execute the disp ppp mp command, and see that the two physical links have been bound to VT0. The two routers can successfully ping the peer IP address. 

[RouterA]disp ppp mp

Template is Virtual-Template0

max-bind: 16, min-fragment: 128 

 Bundle ef63fe328e5d, 2 members, slot 0, Master link is Virtual-Template0:0

 Peer's endPoint descriptor: ef63fe328e5d

 Bundle Up Time: 2006/01/27  07:50:38:696

  0 lost fragments, 5 reordered, 0 unassigned, 0 interleaved

 sequence 4/5 rcvd/sent

 The member channels bundled are:  

      Serial1/0        Up-Time:2006/01/27  07:50:38:696 

      Serial1/1        Up-Time:2006/01/27  07:51:47: