Typical Configuration Of PPPoE Client on AR28、AR46 Series Routers--Using ADSL Interface

Typical Configuration Of PPPoE Client on AR28、AR46 Series Routers--Using ADSL Interface

[Requirements]

RouterA passes through the ADSL line by the ADSL interface, and accesses the Internet by dial up.

[Networking diagram]

[Configuration script]

Configuration script (RouterA)

# sysname RouterA # dialer-rule 1 ip permit        /Create dialer-rule 1/ # radius scheme system # domain system # acl number 2001                 /Configure an ACL for the NAT/ rule 0 permit source 192.168.1.0 0.0.0.255 rule 1 deny # interface Dialer1               /Create int dialer 1/ link-protocol ppp ppp pap local-user huawei password simple 123456  /ADSL account and password for authentication/ ip address ppp-negotiate       /Acquire IP address by PPP negotiation/ dialer user mypppoe dialer-group 1                 /Apply dialer-rule 1/ dialer bundle 1 nat outbound 2001              /Apply ACL 2001 for Easy IP NAT/ # interface Ethernet0/0/0 ip address 192.168.1.1 255.255.255.0 tcp mss 1400 # interface Atm1/2/0 # interface Atm1/2/0.1 pvc to_adsl 0/35                          /Create a PVC for the ADSL line/ map bridge Virtual-Ethernet1              /Bind the PVC with VE 1/ # interface Virtual-Ethernet1               /Configure the VE 1 interface/ pppoe-client dial-bundle-number 1         /Bind VE 1 to the dialer 1 interface/ mac-address 0001-0002-0003               /Configure a virtual MAC address for the VE 1 interface/ # interface NULL0 # ip route-static 0.0.0.0 0.0.0.0 Dialer 1 preference 60 /Set dialer 1 as the default outgoing interface of routing/ # user-interface con 0 user-interface vty 0 4 # return

 

[Verification]

Using the disp int dialer 1 command, you can see that the IP address of the Internet has been acquired, and the intranet can access the Internet through the NAT.

[Tip]

1. The ADSL interface functions equal to the PPPoEoA.

2. The VPI/VCI ID of the  PVC is provided by the ISP, and it is 0/35 usually.

3. The virtual MAC address of the VE interface can be set arbitrarily, but it is preferred to use a special MAC address like 0001-0002-0003.